Beckhoff Automation GmbH

Embedded PC

for building and room automation

The CX8090 Embedded PC is a complete PC controller that can perform many different building automation functions inexpensively and in a space-saving...

Control Panel/Panel PC

New display sizes

With the industrial implementation of technologies known from the consumer world, such as multi-touch and widescreen displays, the CP2xxx and...

Linear Motor

with circular motion

The new XTS drive system (eXtended Transport System) from Beckhoff offers new freedom for mechanical engineering. It combines the previously...

Swapped principle

linear motor with circular motion

The XTS drive system combines the previously separate advantages of rotary and linear systems. The result is a drive system that effectively...

Embedded PC

Suitable for PLC and motion control applications

Equipped with a powerful 1 GHz ARM Cortex A8 processor and large capacity microSD card, Beckhoff’s fanless CX9020 DIN-rail mountable controller...

Comfort and Energy Efficiency in Harmony

Intelligent building automation

People are sensitive beings: not only their comfort, but also their performance level and motivation depend on the climatic conditions in their...

Power Monitoring Terminal

Measurement of voltage and current

The new EL3773 power monitoring terminal for the Beckhoff EtherCAT I/O system is designed to monitor the condition of a three-phase AC or a DC...

PC-based Control

Offers an integrated CNC solution

Based the Beckhoff PC control technology, this modular and finely scalable CNC solution offers an optimally tailored control solution for any...

PROFIBUS PCI Express cards

with flexible NOVRAM memory module

Available with a PCI Express interface that enables the transmission of larger quantities of data, the FC3121 and FC3122 PROFIBUS PC fieldbus...

PROFINET Terminal

Gateway from EtherCAT to PROFINET RT

Beckhoff expands its product range for the EtherCAT I/O system with the EL6631-0010 PROFINET terminal which, as a gateway from EtherCAT to PROFINET...

Uniform Platform

For measurement and automation

Beckhoff offers in Scientific Automation a uniform platform for measurement and autumation. The toolkit is supplemented with high-precision measuring...

Synchronous Servomotors

With up to 200 W outputs

Specially optimized for use with the company’s EL7201 servo terminal, the AM3100 series synchronous servomotors from Beckhoff come with outputs...

PROFINET Bus Coupler

Suitable for EtherCAT Terminals

Acting as a POFINET RT device and integrating a simple EtherCAT master, the EK9300 bus coupler permits the simple connection of high-performance...

EtherCAT I/O Box System

Combines two analog inputs and outputs

Beckhoff has extended its range of IP 67 I/O modules with EP4374 EtherCAT Box, which combines two analog inputs and two analog outputs in a single...

Compact Bus Coupler

Suitable for EtherNet/IP

Extending the company’s “Compact” series bus couplers the BK9055 from Beckhoff couples EtherNet/IP with the company’s modular bus terminal...

Safety Technology

for IP67 applications

Enabling the acquisition of safety sensor signals directly on the machine or plant, the moisture- and dust-resistant EP1908 EtherCAT Box from...

EtherCAT Box Module

forms an Ethercat network

Beckhoff's EP6002 EtherCAT Box module allows the integration of external devices with a serial interface without needing a control cabinet. This...

Embedded PCs

include PLC, safety technology and Condition Monitoring

Beckhoff offers PC- and EtherCAT-based automation solutions for wind turbines. The integration of PLC, safety technology and Condition Monitoring...

Control Panel and Panel PC

with 24" TFT widescreen display

Beckhoff has extended its Control Panel and Panel PC series with a 24" TFT widescreen display that has a resolution of 1920 x 1200 pixels....

Bus Coupler

functions as PROFINET RT slave

Beckhoff's compact BK9053 bus coupler is a PROFINET RT slave for a bus terminal system. This bus coupler has a slim housing design and one Ethernet...

Dynamic Servomotors

for the food industry

Beckhoff is expanding the AM3000 Synchronous Servomotor series with a new FDA-compliant model designed with a resistant, white surface coating....

Control Panels and Panel PCs

made of high-quality stainless steel

With the new Control Panel and Panel PC series made of high-quality stainless steel, Beckhoff introduces control and display units that meet...

Industrial IT Solutions

for food, packaging and medical applications

Beckhoff presents its solutions for industrial IT, industrial communication and building automation with product highlights such as CP-Link 3...

New Software Generation

for PC-based control technology

With TwinCAT 3 – eXtended Automation, Beckhoff integrates the TwinCat programming environment in Microsoft Visual Studio. The eXtended Automation...

Panel PC Series

with compact 5.7-inch display

Beckhoff expands the Economy Control Panel PC series with new versions featuring a compact 5.7-inch display. These panels’ aluminum fronts...

EtherCAT Box

simplifies spare parts inventory

With the moisture- and dust-resistant EP2338 EtherCAT Box, Beckhoff has extended its IP 67 I/O system with a dynamic 8-channel digital variant....

High density Bus terminals

require half the space

The High Density Bus Terminals from Beckhoff feature 16 digital channels in the housing of an electronic 12 mm terminal block. The compact 16-channel...

Control Cabinet PC

in space-saving design

The C6930 control cabinet PC from Beckhoff combines a 3½-inch motherboard designed for Intel Core Duo or Core 2 Duo, a wide range of PC interfaces,...

Safety PLC

PC-based

Since 2003, the safety solution TwinSAFE has been supporting the integration of safety related functions into the automation system via flexible...

CX5000 embedded PC with Atom drive

with Atom drive

CX5000 is a series of compact DIN rail-mountable embedded PCs. They are fanless and have a maximum power dissipation of only 8W. The CX5010is...

PC-based control for food and drink industry

for the food and drink industry

With this PC Control, the entire production process can be automated with a uniform control platform: in the drinks industry from injection molding...

C6915 control cabinet PC

for space-saving installation

The ultra-compact control cabinet PC C6915 only measures 47 x 157 x 116 mm (W x H x D). It is equiped with a 3½-inch motherboard for 1.1GHz...

C65xx Industrial PC

for flexible IPC solutions

The C65xx series is designed to be installed in control cabinets or in the rear panel of a control or console housing. By integrating the IPC...

Digital multimeter inside Bus Terminal I/O

with digital multimeter terminals inside

The use of the new Beckhoff KL3681 (Bus Terminal) and EL3681 (EtherCAT Terminal) increases flexibility thanks to the wide input range and automated...

KL2791 bus terminal

energy saving

The KL2791 Bus Terminal enables direct connection of single-phase AC motors up to 100W. In this way, the speed of capacitor, universal and shaded-pole...

CU2508 port multiplier

8 independent networks to one PC

The CU2508 real-time Ethernet port multiplier has a gigabit uplink from the PC and eight independent 100 Mbit/s output channels. Each of the...

CX1020 embedded PC

with Intel 1GHz, zero second level cache

The basic equipment of the CX1020 Embedded PC features an Intel Celeron M 1GHz processor with 512kB L2 cache. For less demanding applications...

BC9120, BC9020 and BC9050 Ethernet controllers

for bus terminal system

The BC9120, BC9020 and BC9050 versions of Ethernet controllers for the Bus Terminal I/O system differ in terms of technical features. They are...

KL2761 dimmer Bus terminal

with switchable output of up to 600W

The KL2761 dimmer Bus Terminal is intended for direct connection of different lighting devices, such as incandescent lamps as well as inductive...

CP6608 Ethernet Control Panel

with 5.7-inch display

The CP6608 Ethernet Control Panel features an integrated PC with Intel IXP420 processor and several interfaces. The device has 32Mb of flash...

AM3500 servomotors

higher moment of inertia

The AM3500 servomotor series features a higher moment of inertia. That is making them suitable for machine tool axes with stringent synchronism...

IL230x-B905 Fieldbus box module

act as decentralised I/Os

The IL230x-B905 modules are equipped with Ø8, M8 or M12 signal connections. The open I/O system with protection class IP 67 supports twelve...

CP72xx panel PC

for mounting arm installation

The CP72xx high-performance Panel PC is designed for mounting arm installation and integrates those features required for advanced machine control...

BK1250 compact bus coupler

converts E-bus signal for K-bus

The BK1250 Compact Coupler converts E-bus signals for K-bus. The whole range of Bus Terminals can therefore be utilised easily in the EtherCAT...

AS1xxx series of stepper motors

torques ranging between 0.38 and 5Nm

The stepper motors of the AS1xxx series are Beckhoff’s alternative for the small and medium capacity range. Different stepper motor types...

C6920 and C6925 industrial PCs

for control cabinet installation

The C6920 and C6925 Industrial PCs with robust, ultra-compact housing have been designed for control cabinet installation. The main difference...

EtherCAT terminals

integrates Ethernet into EtherCAT

The 1-port EL6601 Ethernet switch terminal from Beckhoff ensures fully transparent and collision-free Ethernet communication of the connected...

CP69xx Economy Control Panels

economical, high performance displays

The CP69xx Economy control panels offer a high-performance display ina robust aluminium housing. The DVI/USB function enables panels to be installed...

Motion control in miniature format

via bus terminals of I/O systems

Stepper motors, dc motors, hydraulic valves and other devices can be controlled via associated bus terminals of the I/O system from Beckhoff...

EtherCAT Terminals

the I/O system for EtherCAT

C69xx industrial PC

for control cabinet installation are equipped with the latest processors

The IPC company

High-quality components based on open standards and the rugged construction of the device housings mean that the industrial PCs are ideally equipped for all control requirement

TwinCAT automation software

integrates real-time control with PLC, NC and CNC functions in a single package

Fieldbus components

for all common I/Os and over 15 major fieldbus systems

The Motion Company

PC-based control technology from Beckhoff is ideally suited for single and mulitple axis positioning tasks with highly dynamic requirements

New Automation Technology

open automation system based on PC Control technology

Beckhoff website

offers a complete overview of the product range: industrial PC, fieldbus components, drive technology and automation software.

C69xx Industrial PCs

in ultra compact housings

The IPC company

High-quality components based on open standards and the rugged construction of the device housings mean that the industrial PCs are ideally equipped for all control requirement

TwinCAT automation software

integrates real-time control with PLC, NC and CNC functions in a single package

The I/O company

Beckhoff supplies a complete range of Fieldbus components for all common I/Os and over 15 major fieldbus systems

The Motion Company

PC-based control technology from Beckhoff is ideally suited for single and mulitple axis positioning tasks with highly dynamic requirements

New Automation Technology

Beckhoff implements open automation systems based on PC Control Technology. The product range covers industrial PCs, I/O and Fieldbus compenents.

Beckhoff website

offers a complete overview of the product range: industrial PC, fieldbus components, drive technology and automation software.

C69xx Industrial PCs

for control cabinet installation

Fieldbus components

for all common I/Os and over 15 major fieldbus systems

TwinCAT automation software

integrates real-time control with PLC, NC and CNC functions in one single package

Industrial PC

ideally equipped for all control requirements

AX5000 servo drive series

with high-performance EtherCAT system communication offers maximum performance and dynamics

New Automation Technology

open automation system based on PC Control technology

Main Catalog 2006

complete overview of product range: Industrial PC, fieldbus components, drive technology and automation software