DELTA LINE announces two new ultraflat Hybrid stepper motors 28S10-0504A and 60S10-1004A. At present, in the range there are two models, 28mm wide/9mm deep and 63mm wide/9.6mm deep, both being designed and built specifically for the Semi-Conductor component feeder markets, however both can be used in other applications such as stirrers, printing heads, packaging and labelling as well as miniature pumps. The high performance neodymium magnet technology assures the highest torque available from the frame size. The 28mm packing a powerful holding torque of 0.98Ncm with a rotor inertia of 1.7 gcm² and the 63mm having holding torque of 6.4Ncm and rotor inertia of 16 gcm². Even small volumes can have minor modifications such as additional rear shaft for the mounting of an encoder will enable much better control of the motor and increased torque, front shaft adaptations to incorporate gearing solutions, customer coils are available upon request. Due to the good positional repeatability, this product ideally suited to applications in the packaging and labelling, printing, textile, factory automation and semiconductor market segments.