UV Curable Adhesive/Sealant

meets low outgassing requirements

  • UV Curable Adhesive/Sealant
    UV Curable Adhesive/Sealant

Master Bond's UV10TKLO-2 is a one component UV curable modified epoxy system which offers optical clarity, high physical strength properties and outstanding chemical resistance. It is not oxygen inhibited, cures rapidly at room temperature when exposed to UV light, is easy to apply and has an advantageous high viscosity. The maximum UV absorption takes place in the 320-365nm range. It has passed the rigorous tests to meet low outgassing specifications as per NASA ASTM E-595. To optimize low outgassing properties, UV10TKLO-2 should be preheated to 50ºC for 15 minutes prior to use and then allowed to cool to room temperature. It has a volume resistivity of >1014 ohm cm and a dielectric constant of 3.6 at 60Hz. UV10TKLO-2 has a service temperature range of -60ºF to 300ºF. It is available for use in half pint, pint, quart, and gallon containers. Shelf life in original unopened containers is 6 months at 75ºF.