Advancing Productivity

ExxonMobil Launches Mobil SHC™ 800 Ultra Series High Performance Turbine Oils
ExxonMobil lead the charge against White Etching Cracks with Second Certification for WEC performance from DNV-GL
Steel Mill Cuts Bearing Failures in Half Following Switch to Mobil™ Lubricant
ExxonMobil at K 2019
ExxonMobil Launches Mobil Pegasus™ 610 Ultra Oil for Modern Medium- and High-Speed Four Cycle Gas Engines
How to Protect Mining Machines
ExxonMobil Launches Landmark Gear and Circulating Oil Mobil SHC™ Elite
Steel your Plant against Inefficiencies and Downtime
Switch to Mobil lubricant extends hydraulic oil drain intervals by 25% for Russian limestone quarry
ExxonMobil helps plastics packaging manufacturer achieve 7% energy saving

Product in spotlight

Sponsored content
Thermal Camera Streamlines Industrial Inspections

Thermal Camera Streamlines Industrial Inspections

Designed to streamline industrial inspections, the new FLIR T860 thermal imaging camera has an ergonomic body, a vibrant LCD touchscreen visible from low angles, and an integrated color viewfinder for sun glare conditions. The 640×480-resolution thermal camera incorporates FLIR's advanced Vision Processing™, including patented MSX® and UltraMax® image enhancement technologies to provide outstanding image clarity.

This new thermal camera is the first to feature onboard Inspection Route software, ideal for streamlining inspections of critical assets, including...

Read more
IDS: More than 100 New USB3 Vision Cameras!

IDS: More than 100 New USB3 Vision Cameras!

IDS Imaging Development Systems GmbH is expanding its USB3 Vision camera range by more than 100 models in the coming weeks. The company integrates the entire range of Sony sensors in several camera families, which it currently already offered with a GigE Vision interface. With IDS peak, it also provides a new SDK for application development for Vision cameras.

IDS peak is entirely based on the standards of EMVA (GenICam) and AIA (GigE Vision, USB3 Vision) and simplifies handling and programming of Vision cameras. You can download...

Read more
GO series - A Breath of Fresh Air in Power Electronics

GO series - A Breath of Fresh Air in Power Electronics

LEM International GO series

A fast measurement speed, achieved within tight cost and size constraints while integrating the primary conductor in SO packages without compromising the necessary insulation, is often as critical as the other high performances for current measurement in motor-drive applications.

A unique sensor with an integrated primary conductor achieves optimum temperature accuracy, measuring from -40 to +125 °C in a surface mounted SO8 or SO16 package. 

10-30 A nominal current Better than 1.3 % accuracy @ +25°C  Differential Hall...

Read more
Intelligent Spotfinder Pyrometer

Intelligent Spotfinder Pyrometer

The Micro-Epsilon intelligent pyrometer offers automatic hot and cold spot detection in industrial applications which enables effective and reliable temperature control. Designed for standalone operation without a PC, it combines the advantages of a robust pyrometer with those of an infrared camera.

It stands out due to its excellent optical resolution with a state-of-the-art motorized focus which enables remote focusing of the lens. When the predefined threshold is reached, an alert signal can be output via the integrated process interface.  

Due...

Read more
Easily Automate PCB Identification in SMT Lines

Easily Automate PCB Identification in SMT Lines

Discover Brady’s complete and reliable labelling solution for printed circuit boards that can automate traceability and generate smart manufacturing data about your SMD production lines.
Discover every component of our complete traceability solution in detail in the online infographic!

Track every printed circuit board

Brady offers a complete traceability solution that can connect every circuit board in production to a Smart Factory set up. With Brady's solution, circuit boards can generate data and send these to a Manufacturing Execution System,...

Read more
Infrared Temperature Sensors for Almost Any Application, Even ATEX Zone 0

Infrared Temperature Sensors for Almost Any Application, Even ATEX Zone 0

With over 35 years’ experience in temperature measurement, Calex manufactures non-contact sensors for a wide range of uses in industrial manufacturing and condition monitoring. For example, ExTemp sensors are ATEX and IECEx certified Intrinsically Safe for use in hazardous areas including Zone 0. They provide a near-instant reading of surface temperature at a very affordable price.

Temperature ranges from -20°C to 1000°C are available. The sensor’s 90% response time is just 240 ms, and a linear 4-20 mA output is provided to transmit the measurement to instrumentation...

Read more
Specialist Optical Systems

Specialist Optical Systems

Resolve Optics is a leader in the design and manufacture specialist optical systems that will effectively operate up to 950°C without the need for additional cooling equipment.

This has made it possible to undertake applications including optical inspection inside an engine or operating furnace as well as non-invasive monitoring of high temperature processes including incineration, recycling, smelting and chemical manufacturing.

For such high temperature applications, optical systems need to be designed to ensure performance is maintained at the...

Read more
New Motion Solution: Servo Made Simple - Easy to Set Up, Painless to Program

New Motion Solution: Servo Made Simple - Easy to Set Up, Painless to Program

Unitronics launches a complete line of AC Servo drives and motors – along with a surprisingly simple approach that enables users to implement Motion Control easily. Ready-Made Motion code, Embedded Diagnostic tools, Automatic communication setup, are just some of the easy-to-use features embedded in this new line.
The offering includes 1 and 3-phase drives and motors, operating at a wide power range of 50W to 5,000W (0.06-6.7 HP) to suit any machine size, with robust, high-resolution built-in serial encoders (absolute: 23-bit, incremental: 20-bit), IP65.

Simplicity...

Read more
Visit DuPont Personal Protection at A+A to find out if you’re protected

Visit DuPont Personal Protection at A+A to find out if you’re protected

From gloves that meet the revised EN 388 standard, to garments for chemical, controlled environments, thermal and mechanical hazards, visit DuPont Personal Protection at Stand A40 in Hall 5 at A+A 2019 to see the latest complete line of industry-leading protection and comfort.

Read more
MP600 Sensors - Sensing 2 Positions within Microns

MP600 Sensors - Sensing 2 Positions within Microns

Microprecision introduced a family of “swiss made” sensors for position detection. The new MP600 series of mechanical sensors very accurately detects two positions within a single, compact electromechanical component. Two independent commutations can sense two previously defined positions to within a few microns of accuracy.

The distance between the two positions can be set specifically for each application, between 0.3mm and 1.5mm. The fixed NC and NO contacts activate with no measurable hysteresis.

Repeatability is less than...

Read more
The Challenge of Using Optical Systems in Space
Designed for purpose military lenses
I/O Isolation 3K VAC for Energy System Application
SPE Push-Pull Connectors
Trench Schottky Rectifiers
Automotive flow measurement
The Challenge of Powering Industrial IoT Applications
Analytics Platform for Wireless Infrastructure Management
Cast Aluminum Oil Reservoirs
SCHURTER Production Site Certified According to IATF16949
Six Steps to Designing a Storage Vessels That Really Works
Flowmeter for Industrial Process & Control
Flowmeters Help Reduce Drug Production Costs
Deep Sea observation

My contents

Recommended for you