Webinars

Product in spotlight

Sponsored content
New C6B force transducer from HBM

New C6B force transducer from HBM

With the new C6B force transducer, HBM offers a flexible solution for economical acquisition of large compressive forces. The sensor is cost-effective and specially designed for rugged and dynamic applications.

The C6B force transducer acquires nominal (rated) forces from 200 kN to 10 MN with an HBM accuracy class of 0.5. Typical applications include the construction industry, heavy industry and metalworking as well as dynamic measurement tasks in research and development. C6B is extremely rugged and has a hermetically welded housing made of rustproof materials. In the version...

Read more
New Measuring Module GEN2tb Enables Convenient and Flexible Entry into Data Acquisition with Ultra-High Sampling Rates

New Measuring Module GEN2tb Enables Convenient and Flexible Entry into Data Acquisition with Ultra-High Sampling Rates

New GEN2tB portable data recorder from the HBM Genesis HighSpeed series; An ideal entry-level product that can be used flexibly for various applications such as eGrid; and e-drive testing, high-speed mechanical testing, and electrical transient recording; Usable as a PC front-end or stand-alone device with the integrated hard disk; and Includes high-speed data acquisition software—Perception.

With the portable data acquisition system GEN2tB, HBM Test and Measurement (HBM) introduces a high-performance starter device for high-speed measurement technology with sampling rates of up...

Read more
Brushless DC-Servomotors with Ø 16 mm

Brushless DC-Servomotors with Ø 16 mm

The new 1660 ... BHx series sets new standards: with respect to dimensions and weight, it delivers high speed and power values with low vibration and heat development, something inconceivable until recently. This drive series is thereby predestined for handpieces with high power requirements in applications with limited installation space.

The BHx series made by FAULHABER are new high power slotless brushless motors in 16 mm diameter based on a 2-pole technology. Through their robust, compact design and outstanding performance data, the motors of this new product family are particularly...

Read more
New draw-wire sensor

New draw-wire sensor

Compared to draw-wire sensors based on a conventional potentiometer, the new wireSENSOR WPS-MK88 U45R with a non-contact potentiometer achieves 8 times more working cycles, which extends the sensor’s service life to its maximum. This new technology combined with a robust plastic housing and a favorable price/performance ratio, sets new standards in terms of economic efficiency.

Due to innovative technology, the new, miniature wireSENSOR WPS-MK88 U45R offers maximum service life with approx. 2 million cycles. The sensor...

Read more
Beverage Dispensing Flowmeters

Beverage Dispensing Flowmeters

Based upon a unique Pelton wheel design, Titan Enterprises beverage dispensing flowmeters are inherently reliable and proven in tens of thousands of installations around the world. Constructed from totally non-metallic wetted components and offering a flow range of up to 10 litres per minute - Titan's NSF-accredited beverage dispensing flowmeters are the product of choice for precise metering of lower viscosity beverages including coffee, wine, beers, spirits and soft drinks. Read here about a case study.

For further information click here. 

 

Read more
Tube Processing Equipment

Tube Processing Equipment

With more than thirty years of experience within the hose and tube processing equipment industry, OP is pleased to offer to their customers a complete range of products particularly suitable for the tube processing: machines for bending stainless (AISI 316TI) and carbon steel (ST 37.4) tubes  with diameter between 5 and 50 mm; 37° and 90° flaring machines for hydraulic rigid tube ends  up to 42 mm diameter and 5 mm thickness and for the preassembling of DIN2353 rings; multifunctional units able to perform any operation...

Read more
Robust, Easy to Clean, and Compatible with the Z6 Market Standard

Robust, Easy to Clean, and Compatible with the Z6 Market Standard

HBM’s new Z6R bending beam load cell has been designed for maximum capacities ranging from 20 to 200 kg. It is outstanding for its extremely robust enclosure, dirt-repellent design, and compatibility with the Z6 load cell. Typical fields of application can be found in the packaging or food-processing industries.

The robust enclosure withstands mechanical stress and is not af-fected by dirt, humidity, and aggressive media. Owing to its innovative design, without any gaps or edges, the Z6R load cell is easy to clean. Scale manufacturers and system operators, thus,...

Read more
IPLEX G Lite

IPLEX G Lite

The IPLEX G Lite industrial videoscope packs powerful imaging capabilities into a small, rugged body. Lightweight and able to go almost anywhere, users working in challenging applications have a remote visual inspection tool with the image quality and ease of use to get the job done.

Get powerful imaging capabilities in a videoscope that´s small and rugged. Ergonomically designed and weighing only 1.15 kg (2.5 pounds), the IPLEX G Lite videoscope can be carried to almost any job site and used comfortably. Responsive TrueFeel articulation enables you to control the scope’s...

Read more
Interesting and Ubiquitous Applications of Power Spring

Interesting and Ubiquitous Applications of Power Spring

Power Springs are formed by winding a steel strip on an arbor to create a compact power source which generates mechanics function such as drive power storage, tensioning and loading, retrieval and automatic retraction.
Ming Tai Industrial company, one of leading manufacturers of steel strip spring, has innovated and developed wide variety of power spring for lots of interesting applications. Let's make some example for industrial engineers' reference.
Power springs can storage drive power. When it is applied to pen-type drug injector, the power spring is enable to generate the force...

Read more
NEW! End-of-Arm Collaborative Robot Vacuum Tool

NEW! End-of-Arm Collaborative Robot Vacuum Tool

The NEW Collaborative Robot Vacuum Tool adds unparalleled flexibility when paired with your collaborative robot end effector. The CRVT is highly configurable and has the ability to pick up variety of work pieces without changing the tool.

With a quick, easy plug and play operation – simply supply compressed air and a signal to control the valve and your operation will be running in no time.

For further information please click here

Read more
Latest Newsletters