We use cookies to provide you with personalized services and improve our website. More info Ok
Three different software collections tailored to start-up budgets that support company growth
The conservation organization Project Seagrass and Tandem Ventures have joined forces to design, develop, build, and test an underwater harvesting machine. Onshape enables the team to collaborate in real time, even from a boat.
3D printing in companies is booming. Design engineers are printing special components and wear-resistant parts themselves without further ado. However, the projects stand or fall on the quality of the printing material, warns Jonas Burk, Head of Additive Manufacturing at igus. The fact that 3D printing with high-performance polymers from igus is worthwhile is not only proven by the service life tests. Customers can also manufacture their products more economically and faster than injection moulding.
Fraunhofer project for better recycling processes of paper packaging
Capable of providing single or dual outputs in different proportions
IEN Europe spoke with Dr. Malte Köhler, Head of Technologies, about the development of the company’s nanoscale force and temperature sensor
Completely new class of substances discovered, over 30% faster in conducting ions than all previously known substances
Polytetrafluoroethylene (PTFE) has been the hero in the fight against friction and wear for years. However, there is also the other side of the coin: as a persistent material, PTFE is currently the focus of the discussion about a possible PFAS ban by the ECHA. Even if there is no ban, the motion plastics pioneer igus has good reasons to look for alternatives. With new formulations, extensive tests and adapted production processes, igus already offers its customers a wide range of PTFE-free products. Author: Dr-Ing. Magnus Orth is Head of Material Development and the Technical Centre at igus.
Online lectures on photonic future markets live and stream free of charge
The Fraunhofer-Gesellschaft will be represented at the world’s largest industrial trade show with a joint booth showcasing highlights from different technological fields.
Air filters and high-performance oils for reduced operating costs
All-in-one interface for control and visualization
Wire Arc Additive Manufacturing (WAAM) is an additive manufacturing process that has become increasingly important in the 3D printing of metals in recent years. High build rates, wire as an inexpensive and easily available starting material and a highly controllable process are the main advantages. To optimize 3D printing, the Berlin-based 3D printing specialist GEFERTEC records the temperatures in the workpiece using infrared measurement technology from Optris.
CRP USA, a leading 3D printing service bureau, has partnered with eight-time Paralympics Gold Medallist Tatyana McFadden to create groundbreaking 3D printed wheelchair racing gloves using the Selective Laser Sintering process and Windform XT 2.0 composite material. This collaboration addresses significant manufacturing challenges and sets a new standard for elite athletic gear.
3D printed material should part of a lunar mission for performance testing and confirmation of earth-bound test results
The pressure towards sustainability is pushing the oil, gas and energy sectors to evolve innovative and diverse solutions in a move to create an energy efficient future. Major transformations within the oil and gas industry in the form of adopting sustainable practices, developing new revenue streams and pushing the boundaries of technology, are being trialled and delivering success. Expanding into...
LEWA, a manufacturer of metering pumps and systems, relies on IE5+ motors from NORD DRIVESYSTEMS for high precision applications. They combine a wide control range with outstanding energy efficiency.
Mobile App for on-site analysis of lubricant condition in bearings and linear motion systems
The measurement of low flow is becoming widely used in many industries. However, the smaller the flow, the trickier it is to control and measure, and finding a suitable flow measuring technology at reasonable cost can prove challenging for both users and flow sensor manufacturers.
Operates with wide range of three-phase Delta and Wye inputs
High-resolution, radiometrically calibrated for temperatures from 300 to 1700 °C
Enable flow measurement of high viscosity liquids in demanding applications such as chemical and petrochemical industry.
The company is constantly developing their portfolio to meet the new requirements of climate change and technological progress.
Ideal for Pharmaceutical & Medical Applications
Following the publication of a whitepaper, Titan reports on the considerations required when choosing a flow measuring device for batching control.
Titan’s Oval Gear range of flowmeters offer excellent chemical resistance whilst maintaining high performance and 0.1% repeatability
Flowmeter design is adapted to meet specific high pressure and chemical resistance requirements, as well as hazardous environments
Perfect for low flow applications
Joint venture with ZEISS and financial/venture capital investors, as well as an extended use of on-demand additive manufacturing for prototypes as along with a spare-part supply
Stratasys announces new open tier of third-party materials for FDM® 3D printers via an annual Open Material License
GrabCAD Print software is specifically optimized to allow users to easily achieve production-scale quantities of parts
New material options for advanced aerospace, hypersonic and medical applications that require high-performing material properties
The benefits of digitalization are well-known. Many businesses embracing Industry 4.0 have seen significant efficiency and productivity benefits while reducing costs. And this rapid growth is showing no signs of slowing down.
New 3D Print prep Pro software for the Mimaki 3DUJ-series, and complete 3D solution for the Mimaki 3DUJ-2207
Wide-ranging solutions address full product value chain and unlimited possibilities of additive manufacturing from prototyping to production.
This project involves obtaining new resources from marine and municipal waste that respect the environment and human health.
Selective Absorption Fusion technology will power new H Series 3D printers as Stratasys zeroes in on growing market for 3D-printed mass production parts
For offshore oil and gas industry
Gas turbines are an efficient means of power generation that can be quickly deployed during times of peak demand
Nexa3D and Henkel partner for durable material for medical and athletic devices
Digital Edition Download PDF
