Posted on November 21, 2012 - ( views)
Schaffner has adapted the power cord family IL13 according to the new requirements of Swiss safety standard. The Swiss version of the power cord series with the IEC Lock, which clicks into the IEC inlet thanks to a user-friendly locking knob and can be just as easily unlocked again by pressing the knob, has been changed over to the new partly insulated mains plugs in compliance with the latest edition of safety standard SEV1011. So the protection against electrical shock during plug in and pull out with outlets type 12 (without protective shroud) has been increased. The use of the power cords is supposed to improve the reliability of electronic systems that are exposed to vibration, like e.g. with mobile applications. The power cords can be used for all devices, which are dependent on a reliable mains connection, as for instance in IT, medical, laboratory or communications areas. It can be used with every Schaffner IEC inlet filter or IEC inlet type C14 up to 10A in accordance with standard EN60320. The power cord is supplied by default in black with a length of 2m. The red mark on the locking knob clearly distinguishes IL13 from conventional power cables. Besides the new Swiss mains plug type 12 the power cord family can be supplied with various mains plugs for international use. The product does conform to the requirements of RoHS and REACH.
Available for applications in the voltage range of 200V to 240VAC
For applications and projects where marine approvals are required
Extended power rating up to 400kW/50Hz and 500HP/60Hz
For 690 V systems
For space-critical applications
For 200V systems
Compact, only 46mm high
Available as one- and three-phase designs
Intel® Core™ i3, i5, Celeron 847E and 1020E + Intel QM77 PCH 1X DDR3/DDR3L SODIMM support to 8 GB Multiple expansion...
ADVANTECH Europe BV
IEN Europe: Mr. Chiu, the Internet of Things is reshaping the industrial production. What kind of challenges will this new...
Advantech Europe B.V.