Voltage Controlled Oscillator

  Enquire / contact me

-105 dBc/Hz typical phase noise at 10 kHz offset

Electronics & Electricity

Voltage Controlled Oscillator
Voltage Controlled Oscillator

Operating from 2850 to 2950 MHz with a control voltage range of 0.3V to 4.7V, Crystek's CVCO55CC-2850-2950 VCO features a typical phase noise of -105 dBc/Hz at 10kHz offset and has very good linearity. Output power is typically +5 dBm. Enclosed in the industry-standard 12,7 x 12,7 mm SMD package, the VCO’s input voltage is 5V, with a maximum current consumption of 25 mA. Pulling and pushing are minimized to 2.0 MHz and 1.0 MHz/V, respectively. Second harmonic suppression is -15 dBc typical. The device finds applications in digital radio equipment, fixed wireless access, satellite communications systems, and base stations.

Edited by: Teoman Tugsuz

Posted on May 12, 2011 - (1498 views)
Crystek Corporation
12730 Commonwealth Drive
33913 Ft. Myers - USA
+1-239-5613311
+1-239-5611025
View full company profile
Location
Related articles
Power Entry Module DG11
Which Lithium-Battery Fits in my Project?
450W AC/DC PSU Solution
450 Watt Medical Power Supplies
2MHz Boost/SEPIC/Inverter
New 450 Watt Medical Power Supplies
Tiny Boost Regulator
30W Modular AC/DC Series
Miniature High-Performance Connector
Condition Monitoring Devices
Innovative Systems Solutions Made by LAPP
Reflowable Thermal Switch
Electrify Europe, 19-21 June 2018
INNOVATIVE SYSTEMS SOLUTIONS
Shock-safe fuseholder
Embedded Hardware
Low- and High Voltage Electrical Products
AC Contactor
Safety Switches with RFID Technology
Moulded Case Circuit Breaker
Alkaline Batteries
Safety Switches with RFID Technology
Metal Line Switches from SCHURTER
Light Pipe for Status Display
Waterproof Push/Pull Appliance Coupler with Protection Degree IP67 and IP69K
Multi-functional Safety Relay Module PROTECT SRB-E
SnapLock D-SUB hood
Digital Lock-in Amplifier MFLI
Flexible and Hygienic Safety Technology AZM 300
Stainles Steel Enclosures