With the new MP600 mechanical sensor family, Microprecision Electronics presents a low voltage position switch with NC and NO contacts. The travel between the two contacts is factory set at a distance ranging from 0.3mm to 1.5mm.
This allows two position detection without hysteresis and with a repeatability of less than 5µm. One single sensor can be used to control high and low limits of a process, or home position and overrun position of a linear movement.
Other Key Features are:
Temperature Range -40°C...
The new BradyPrinter M611 Mobile Printer announces a new chapter in the ongoing evolution of identification. Even the most complex labels can now easily be designed in the field using only a smartphone and Brady Corporation's free Express app before printing on reliable, industrial grade label materials with the BradyPrinter M611. See how it works!
Design any complex label in the field with a phone
With Brady's Express app installed on any smartphone, users can easily design complex labels with 1D and 2D codes and barcodes, serialise, use an extensive image library,...
IDS has integrated the high-resolution 12 MP IMX226 rolling shutter sensor into the uEye CP camera family, giving increased resolution, speed and sensitivity. The new models are available with GigE or USB3 interfaces and are available from May.
Thanks to the BSI ("back-side-illumination") technology of the SONY STARVIS series of sensors, the IMX226 is perfect for tasks that require optimal results even in low light conditions. It delivers extremely low-noise images and is therefore ideally suited for applications in areas such as microscopy, logistics and traffic monitoring.
With a weight of only 8 g and a size of just 19 x 19 mm, the Micro-Epsilon wireSENSOR MT19 is used for displacement and distance measurements with a measuring range of 40 mm.
Enabling wire accelerations of up to 60 g, the sensor is particularly used in applications where high dynamics are required (crash tests, simulators or test benches). The miniature design enables installation into very small spaces. Through-bores in the housing support easy mounting.
Many different types of optical imaging and sensing systems are today used to observe and measure the Earth and the universe at large. Drawing upon approaching 30 years expertise in designing radiation resistant optics for satellites and spacecraft, Resolve Optics is today a leading supplier of optical components and systems for this harsh remote environment.
Click here for further information.
Flir System cooled midwave infrared (MWIR) cameras have long held a tactical advantage over uncooled longwave infrared (LWIR) cameras in many airborne and ground-based missions.
While cooled MWIR cameras are highly sensitive, they are also larger, heavier, require more power, and cost more than uncooled LWIR cameras. Recent advancements in High Operating Temperature (HOT) MWIR technology open up new possibilities.
Microprecision Electronics SA now introduced its MP100/200 series microswitches with an optional integrated LED indicator light.
These microswitches with integrated LED status indicator have been designed for use at 24V in industrial automation applications. They allow a simple, visual control of the switching function, which can be very cumbersome to perform, in particular when the switch is mounted far away from the connected controller. Also, a broken cable will be instantly recognisable. In addition, the LED facilitates the intuitive calibration...
Elesa is pleased to announce its continually expanding range of high-quality machine components such as handwheels, handles, clamping knobs, position indicators, knobs, latches, hinges, castors and levelling feet, which will be showcased at Hannover Messe (Hall 16, Stand G10 and Hall 3, Stand L42).
Column level indicators HCK series have been designed and realized to read the liquid level of hydraulic systems that use liquids containing aggressive chemical agents, including glycol-based solutions. Watch the video! At the exhibition...
Power Springs are formed by winding a strip of material on an arbor and into a case or retaining ring to create a compact power source. Power spring features
retractable, tensioning and loading function. When it comes position movement and high adjustment of machine and appliance, precise positioning performance and easily operating are required at first priority.
In medical devices field, Ming Tai's power spring had been employed in Draw-wire Encoder for positioning of MRI and x-ray machines, which has gained great performance.
Building new machines for today’s factories requires sophisticated control and automation that can only be delivered through multiple solutions and components – including a PLC, HMI, and VFD (Variable Frequency Drive). As all components must be integrated, selecting the right combination is crucial to the efficiency and success of the machine development project.
Why risk multi-vendor complexity?
Researching different products from multiple companies can be a major drain on time as well as confusing, with different offers and delivery schedules. And, when you have questions...