Themes

Quickly identify small volume products
Enclosed Filter
Safety shock absorbers
Tiny Boost Regulator
30W Modular AC/DC Series
Miniature High-Performance Connector
Condition Monitoring Devices
Military Specification Lenses
High Performance SWIR Camera
25 Gbps Directly Modulated Laser Diodes

Product in spotlight

Sponsored content
RTS - Reflowable Thermal Switch

RTS - Reflowable Thermal Switch

SCHURTER introduces its new RTS, a particularly compact overtemperature protection device using advanced SMD technology. It is suited for the highest demands of protection in power semiconductors.

RTS stands for "Reflowable Thermal Switch". It was developed to protect highly integrated power semiconductors like MOSFETs, ICs, IGBTs, Triacs, SCRs, etc. from overheating. Before mechanical activation, the RTS can be mounted using conventional reflow soldering techniques with temperature profiles up to 260 °C.

Applications

Read more
GO. A breath of fresh air in power electronics

GO. A breath of fresh air in power electronics

A fast measurement speed, achieved within tight cost and size constraints while integrating the primary conductor in SO packages without compromising the necessary insulation, is often as critical as the other high performances for current measurement in motor-drive applications.

A unique sensor with an integrated primary conductor achieves optimum temperature accuracy, measuring from -40 to +125 °C in a surface mounted SO8 or SO16 package. 
  
• 10-30 A nominal current
• Better than 1.3 % accuracy @ +25°C 
• Differential Hall...

Read more
High Sensitivity Remote Leak Detection

High Sensitivity Remote Leak Detection

FLIR Systems High Sensitivity Mode (HSM) is a technological innovation to enhance the leak detection performance of their GF-Series optical gas imaging cameras. FLIR GF Series OGI camera's offer quick, non-contact remote measurement of gas leaks in real time.
Using the high sensitivity mode even the smallest of gas leaks can be spotted.

Further Information / Download

Read more
Brushless DC-Servomotors with Ø 16 mm

Brushless DC-Servomotors with Ø 16 mm

The new 1660 ... BHx series sets new standards: with respect to dimensions and weight, it delivers high speed and power values with low vibration and heat development, something inconceivable until recently. This drive series is thereby predestined for handpieces with high power requirements in applications with limited installation space.

The BHx series made by FAULHABER are new high power slotless brushless motors in 16 mm diameter based on a 2-pole technology. Through their robust, compact design and outstanding performance data, the motors of this new product family are particularly...

Read more
NEW! End-of-Arm Collaborative Robot Vacuum Tool

NEW! End-of-Arm Collaborative Robot Vacuum Tool

The NEW Collaborative Robot Vacuum Tool adds unparalleled flexibility when paired with your collaborative robot end effector. The CRVT is highly configurable and has the ability to pick up variety of work pieces without changing the tool.

With a quick, easy plug and play operation – simply supply compressed air and a signal to control the valve and your operation will be running in no time.

For further information please click here

Read more
Precision displacement, distance and position measurement under pressure

Precision displacement, distance and position measurement under pressure

The eddyNCDT 3005 from Micro-Epsilon is a new, powerful eddy current measurement system for fast, high precision displacement measurements. Due to its pressure-resistant, thermally stable and compact design, the eddyNCDT 3005 is ideal for machine integration.

Non-contact eddy current sensors from Micro-Epsilon are designed for extremely high precision measurement of displacement, distance, position, oscillation and vibration, etc. to micrometer accuracies. Pressure, dirt, oil or high temperatures have almost no influence on measurement precision. This eddy current measurement system...

Read more
NSF Accredited Flowmeters for Food Manufacturing

NSF Accredited Flowmeters for Food Manufacturing

Titan Enterprises 800 Series turbine flowmeter and beverage meter have achieved NSF/ANSI 169 accreditation as approved equipment for food production and handling. As part of the NSF-certification process Titan Enterprises were required to submit samples of the 800 Series and Beverage meter to NSF for analysis. The detailed analysis by NSF included a technical review, a materials review, physical evaluation and a literature/marking evaluation. The competitively priced 800 series turbine flowmeter is designed to give high performance over 6 flow ranges from 0.05 to 15 L/min. The devices totally...

Read more
High Temperature Endoscope

High Temperature Endoscope

Resolve Optics has supplied several high temperature Short Wavelength Infrared (SWIR) endoscopic viewing systems to enable inspection of the blades in a gas turbine while in operation. To enable inspection during gas turbine operation required that the SWIR endoscope had to operate up to 950° C at the tip with 150PSI pressure and be able to withstand severe vibration. To overcome the negative effects of high temperature and pressure – Resolve Optics created a novel design which allowed introduction of cool air at high pressure at the mid-section of the endoscope....

Read more
New draw-wire sensor

New draw-wire sensor

Compared to draw-wire sensors based on a conventional potentiometer, the new wireSENSOR WPS-MK88 U45R with a non-contact potentiometer achieves 8 times more working cycles, which extends the sensor’s service life to its maximum. This new technology combined with a robust plastic housing and a favorable price/performance ratio, sets new standards in terms of economic efficiency.

Due to innovative technology, the new, miniature wireSENSOR WPS-MK88 U45R offers maximum service life with approx. 2 million cycles. The sensor...

Read more
High Volume Machines for Hose Assemblies

High Volume Machines for Hose Assemblies

With more than thirty years of experience within the hose and tube processing equipment industry, OP is pleased to offer to their customers a complete range of products particularly suitable for the high volume production of hose assemblies: the crimping machine V160ES, the cutting machine TF6, the skiving machine SPF6 and the preassembling machine Insert 03P.

The model V160ES is a high volume crimping machine, ideal for crimping hoses up to 3” six spirals and industrial hoses up to 6” . The crimping force is of 345 TON, the max. crimping diameter is of 160...

Read more