IDS Imaging Development Systems GmbH is expanding its USB3 Vision camera range by more than 100 models in the coming weeks. The company integrates the entire range of Sony sensors in several camera families, which it currently already offered with a GigE Vision interface. With IDS peak, it also provides a new SDK for application development for Vision cameras.

IDS peak is entirely based on the standards of EMVA (GenICam) and AIA (GigE Vision, USB3 Vision) and simplifies handling and programming of Vision cameras. You can download...

Microprecision introduced a new range of microswitches MP83, for general purpose use. Versatile, these snap action switches are IP40 protected. They are complementary to the MP300 range of pre-cabled switches with IP67 protection. Economic, this range is designed to operate in temperatures from -60°C to +130°C. They are UL/EN certified with a power rating of 250VAC/16A, with a standard activation force of 0.8N. If required, a high force variant is available and allows the use of a telescopic actuator, with a pin or roller...

LEM International GO series

A fast measurement speed, achieved within tight cost and size constraints while integrating the primary conductor in SO packages without compromising the necessary insulation, is often as critical as the other high performances for current measurement in motor-drive applications.

A unique sensor with an integrated primary conductor achieves optimum temperature accuracy, measuring from -40 to +125 °C in a surface mounted SO8 or SO16 package. 

10-30 A nominal current Better than 1.3 % accuracy @ +25°C  Differential Hall...

Resolve Optics is a well established supplier of specialist endoscopic systems for hostile environments where radiation, extremes of temperature / pressure or contact with corrosive liquids and gases would render standard products unusable.

To enable inspection inside of operating furnace and boilers, Resolve Optics has supplied several specialist endoscopes to non-invasively analyse high temperature processes including incineration, recycling, smelting and chemical manufacturing.

For further information click here

If gloves aren’t comfortable, workers won’t wear them. Only Kevlar® delivers maximum comfort while meeting the new EN 388 standard. Start protecting your workers with hand and arm protection they’ll want to wear.
 

The A35sc Benchtop Test Kit from FLIR Systems has been designed for engineers and scientists who want to know exactly where to make thermal measurements and trust their findings every time.

Unlike thermocouples or spot pyrometers, the A35sc allows you to measure thousands of temperature points across your target and get reliable data in seconds. Together with the kit’s lens choices and advanced analysis software, the A35sc kit is the most dependable temperature...

Unitronics launches a complete line of AC Servo drives and motors – along with a surprisingly simple approach that enables users to implement Motion Control easily. Ready-Made Motion code, Embedded Diagnostic tools, Automatic communication setup, are just some of the easy-to-use features embedded in this new line.
The offering includes 1 and 3-phase drives and motors, operating at a wide power range of 50W to 5,000W (0.06-6.7 HP) to suit any machine size, with robust, high-resolution built-in serial encoders (absolute: 23-bit, incremental: 20-bit), IP65.

Simplicity...

Thermal imaging is a trusted non-destructive technique which can detect internal defects in advanced materials through target excitation and the observation of thermal differences on the sample surface.

The FLIR A6750sc SLS thermal imaging camera from FLIR Systems comes standard with Lock-In, Transient, and Pulse capabilities enabling you to undertake meticulous Non-Destructive Testing (NDT) or stress mapping of advanced materials, resolving temperature differences as low as 1 mK. 

The Micro-Epsilon this miniature sensor with integrated controller measures displacement, distance and position on a wide range of surfaces. Its Auto Target Compensation (ATC) feature enables reliable control of the distance signal regardless of target color or brightness. Immediately ready to use, the sensor can be easily integrated without having to make any further settings. An intuitive web interface enables set up and configuration,...

Discover Brady’s complete and reliable labelling solution for printed circuit boards that can automate traceability and generate smart manufacturing data about your SMD production lines.
Discover every component of our complete traceability solution in detail in the online infographic!

Track every printed circuit board

Brady offers a complete traceability solution that can connect every circuit board in production to a Smart Factory set up. With Brady's solution, circuit boards can generate data and send these to a Manufacturing Execution System,...