The eddyNCDT 3060 inductive measurement system is based on eddy currents and enables fast, precise displacement measurements in industrial environments. More than 400 sensor models can be combined with the eddyNCDT 3060. Based on ease of use and smart signal processing, this non-contact system defines a new performance class in inductive displacement measurement.

In contrast to conventional inductive sensors, displacement sensors based on eddy currents stand out due to their high accuracy, bandwidth and temperature stability. Furthermore, this measuring principle enables measurements...

HBM eDrive Testing is the revolutionary system for testing electrical inverters and electrical machines. Mechanical signals (e.g., torque) and electrical signals (current, voltage) are acquired simultaneously, helping you to better understand the electric drive and its losses in minutes rather than days. This is important for the optimization of the drive as well as the increase in efficiency.

In contrast to conventional power analyzers, HBM eDrive Testing offers unique data acquisition and analysis capabilities in addition to power measurement.

The...

Labfacility are distributors of the Verigo Cold Chain range of Data Loggers for monitoring temperature, humidity and food storage quality - Introducing the new Pod Range.
Cold Chain Monitoring - Easier than ever. Save time, ensure quality, and increase visibility of your temperature controlled logistics operations. NO wires or WiFi required.
The Pod environmental data logger records and wirelessly transmits temperature data and excursion alerts to your smartphones and tablets; no cables or readers required! Simply download the Verigo app for Android™ or iOS™ to your smart device...

More and more applications in the areas of robotics, prosthetics, laboratory automation, medical device technology, pumps, and aircraft cabin equipment require high torque in a very short length.  FAULHABER has raised the bar in the area of high performance, external rotor, slotted drives with the introduction of the FAULHABER BXT family of flat brushless DC motors.

Thanks to innovative winding technology and an optimised design, the motors are just 14, 16 and 21 mm in length but deliver torques up to 134 mNm, within a diameter of 22 mm, 32 mm and 42 mm respectively. They...

With the new C6B force transducer, HBM offers a flexible solution for economical acquisition of large compressive forces. The sensor is cost-effective and specially designed for rugged and dynamic applications.

The C6B force transducer acquires nominal (rated) forces from 200 kN to 10 MN with an HBM accuracy class of 0.5. Typical applications include the construction industry, heavy industry and metalworking as well as dynamic measurement tasks in research and development. C6B is extremely rugged and has a hermetically welded housing made of rustproof materials. In the version...

The ALF14 Label Feeder is supplied with adapters for common SMT pick-and-place systems, making it an extremely flexible tool with a short set-up time. The label feeders’ fully automated label guidance system and fast sensing and dispensing is designed to keep up with the demands of modern pick equipment, while its compact design minimises occupied space in your feeder rack.

Why should you consider ALF14 Label Feeder?

feeds labels to a wide range of pick-and-place machines  highly flexible thanks to a modular & compact design highly affordable works with Brady's...

Titan Enterprises offers a high-pressure turbine meter for measuring the flow of liquid refrigerants. Incorporating steel reinforced polymer components, to give a pressure rating of 40 Bar, the low inertia turbines of the flowmeter have proven ideal for measuring the low viscosities (0.3 to 0.4 centipoises) encountered with volatile refrigerant fluids measured in the liquid form. With careful sensor selection the pressure drop through the flowmeter is low enough to prevent gas break-out and ensure reliable flow measurement from -25°C to +125°C.

For...

Ensenso XR is the first model of the 3D camera series offered by IDS to feature on-board processing. This means that it calculates the 3D point clouds itself and sends them via Gigabit Ethernet or Wifi to a host PC for further 3D data analysis.
Ensenso XR is ideally suited for multi-camera systems, as it reduces the load on bandwidth and connected PCs, for example. Depending on the parameterization, the 1 GigE models of the new camera family are about twice as fast as those of the Ensenso X series. Bin picking applications that are designed for the fastest possible clock rate, for example,...

The FLIR ETS320 non-contact thermal management system takes the guesswork out of thermal testing of your electronic products with fast discovery of hot spots and potential points of failure. "The FLIR ETS320 has helped us to clearly visualizes hot spots on our assembled printed circuit boards. At ISOMEDIA, we value our time, so if we have something like the ETS320, it speeds up the repair work tremendously. It's also easier to use for this type of work". Read the customer application story in full to find out how the FLIR ETS320 reduced test times and sped up repairs at ISOMEDIA.

For...

The Thermocouple Welder, manufactured by Labfacility, is a compact, simple-to-use instrument designed for thermocouple and fine wire welding.
It is primarily designed for use by sensor manufacturers to produce commercial grade thermocouple junctions; it is ideal for producing large numbers of exposed junction thermocouples for test and development laboratories. 

Use of the Thermocouple Welder does not require specific skills and most operatives will be capable of producing quality work with little practice. Supplied complete with the following accessories:

...