Type of resources

Sensor Technology

Absolute IO-Link Encoder
Metering Grease Lubrication Flow in a Wind Turbine
How do I measure
Flow Technology Spotlight:  Ultrasonic flowmeters - principles of operation
Low-Power, Waterproof MEMS Sensor
Confocal Midrange Controller with one and two Channels
Transducer for Electrical Networks
Laser triangulation sensors
New Draw-Wire Displacement Sensors Create New Opportunities
Universal Laser Sensor for Industry & Automation

Product in spotlight

Sponsored content
Patented retention system for pressure hoses

Patented retention system for pressure hoses

The energy contained within a pressure hose, in case of disconnection from the fitting, can be very dangerous to anyone or anything in its vicinity.

The patented system STOPFLEX of OP srl, has been designed to arrest the trajectory of the flexible hose, thus avoiding that the energy contained inside may trigger a frightening "whip effect".

The cable secures the hose to the plant protecting both the operators and components.

The bend, equipped with a rubber gasket, remains perfectly secured, simultaneously allowing the hose to swell according...

Read more
Massive weight reduction of the high current filters FMER SOL and FMCC SOL

Massive weight reduction of the high current filters FMER SOL and FMCC SOL

SCHURTER reduces the weight of the high current filters FMER SOL and FMCC SOL. The successful AC and DC filter series with currents up to 2500 A have big housings and heavy weights. The product weight was significantly reduced with an optimized potting compound. In the FMER SOL series, filters with a rated current higher than 250 A are able to benefit from this weight reduction, while in the FMCC SOL series all variants do.

The FMER SOL filters are designed for rated currents from 25 A to 2300 A at 55 °C ambient temperature, and voltages up to 1200 VDC. The filter...

Read more
Confocal Midrange Controller with one and two Channels

Confocal Midrange Controller with one and two Channels

The confocalDT 2421 and 2422 controllers open up new possibilities in precision distance and thickness measurement on different surfaces. The two-channel variant is an innovation whereby two confocal sensors are connected to a controller.

Particularly for diverse measurement tasks in the glass industry where typically high throughput rates occur, the new confocalDT 2421 and 2422 confocal controllers are ideal. Therefore, it is possible to perform multi-track measurements on flat glass, two-sided thickness measurements and multipoint...

Read more
SMD Solid-state Fuse for the Most Demanding Applications

SMD Solid-state Fuse for the Most Demanding Applications

SCHURTER's new High Current Fuse, HCF, is an extremely robust SMD fuse, designed using solid-state / thin-film technology. The HCF is especially suited for use in particularly harsh applications, where the reliable interrupt of high currents is critical.

SCHURTER's experience, acquired from the development of solid-state fuses for the space industry, and the cooperation with ESA, have led to the development of the HCF. The new HCF has a similar structure as the two ESA-certified types SCHURTER MGA-S and HCSF. Fuses used in Space applications meet the...

Read more
High-Speed High Sensitivity Thermal Camera

High-Speed High Sensitivity Thermal Camera

Precise camera synchronization and triggering make FLIR Systems A6700sc series thermal camera ideal for high-speed, high sensitivity applications. Working in snapshot mode the FLIR A6700sc is able to register all pixels from a thermal event simultaneously.

This is particularly important when monitoring fast moving objects where a standard thermal imaging camera would suffer from image blur. Routinely achieving a high thermal sensitivity of <20 mK, the FLIR A6700sc is able to capture the finest image details and temperature difference information.  

For...

Read more
Finding Hot Spots and Speeding Up PCB Repairs

Finding Hot Spots and Speeding Up PCB Repairs

Take the guesswork out of thermal testing of your electronic products with fast discovery of hot spots and potential points of failure. "The FLIR ETS320 has helped us to clearly visualizes hot spots on our assembled printed circuit boards. At ISOMEDIA, we value our time, so if we have something like the ETS320, it speeds up the repair work tremendously. It's also easier to use for this type of work". Watch this video to find out how the FLIR ETS320 reduced test times and sped up repairs for an electronics company. Hands-free troubleshooting!

 

Read more
CDS1 - Configurable Display Switch

CDS1 - Configurable Display Switch

SCHURTER is launching a new generation of intelligent input systems with capacitive touch technology. The intuitive operation with the touch of a finger stroke, wipe or rotation on the touchscreen conveniently resembles that of a smartphone. It delightfully responds to the visual taste and selection wishes of the customer.

Fully configurable

The user decides what is displayed. Then, with a wipe of the bright round OLED display, the selection can be activated. Tap the home LED to return to the home screen. Hard image change,...

Read more
Entry Level Flow Indicator

Entry Level Flow Indicator

The Pulsite Solo from Titan Enterprises is a low cost, battery powered rate and total flow indicator. These panel or surface mounting digital instruments, that require no external power when used with magnetic sensors or contact closures, are designed to be as versatile as possible permitting customisation to suit almost any flow measurement application. With housing constructed from durable polymer, and sealed to IP64 specifications, the Pulsite Solo can be used in a wide range of operating environments. Designed for ease of use, programming on the Pulsite Solo is simple using the 2 front...

Read more
Easily Identify Electrical Panels with just one Printer

Easily Identify Electrical Panels with just one Printer

The BSP41 Wire & Panel Identification Printer can efficiently identify electrical panels because it can print rigid identification tags for all major terminal block and component brands. The new printer enables you to quickly offer insight into how an electrical panel is connected for future maintenance and improvement projects.

Identify every terminal block

The BSP41 Wire & Panel Identification Printer can print on rigid identification tags for all major electrical panel terminal block and component brands. With BSP41, panel builders no longer need a rigid tag printer...

Read more
Evolution: Light pipe for status display

Evolution: Light pipe for status display

SCHURTER is launching the series 6610-5, the logical evolution stage from the successful 6610 series; a new level of functionality is added to the industry's original outlet popularly known for the highest level of efficiency during assembly.

The new 10 A-appliance outlet, series 6610-5, offers integrated guides for light pipes. It features up to two light pipes, intended to channel light from LED's placed on a printed circuit board to the outlet surface. Technicians are able to clearly see which systems are working properly, or respond to required maintenance...

Read more