EBE sensors + motion has introduced the LCPK100M, an enclosed capacitive level sensor designed for continuous, non-contact measurement of liquids and bulk solids. The sensor measures through non-metallic container walls, eliminating direct contact with the medium while simplifying integration into equipment and systems.
Easy to integrate
Based on the company's capaTEC® technology, the LCPK100M supports measurement through materials such as glass, PE, PP and ABS, with typical wall thicknesses of up to 5 mm. The compact sensor measures approximately 110 × 37 × 9 mm and provides a continuous measuring range of 100 mm. Additional measuring ranges are available on request. The sensor can detect media with a dielectric constant starting at approximately 3 and is suitable for liquids including glycol, alcohols and cleaning agents, as well as bulk materials.
A distinguishing feature is the integrated induTEC® sensor, which enables on-device setup without requiring software, a PC or dedicated tools. Users can select the desired output signal and initiate automatic calibration directly at the installation site using a metal object. According to the manufacturer, this simplifies adaptation to different tank geometries and operating conditions. Alternatively, sensors can be delivered preconfigured and precalibrated for series production.
Operates with removable tanks
The LCPK100M supports 0-10 V, 4-20 mA, PWM and RS-485 outputs within a single hardware version. Operating from 4.5 to 30 VDC, it uses an industrial M8 connector and carries an IP65 protection rating. Status LEDs support local diagnostics, while installation options include cable ties, clamps, brackets and adhesive mounting. The sensor can also operate with an air gap of several millimetres between sensor and container, supporting applications with removable or interchangeable tanks.





















