With its compact design, the new PILZ safety locking device PSENmlock mini for personnel protection is ideal for space-critical applications, such as flaps or covers for example. The actuator has a wide range of mounting options, enabling a high level of flexibility during installation.
No space? No problem!
With its compact design of just 30x30x159 mm, you’ll always find space for the safety locking device PSENmlock mini, even in space-critical applications. The safety switch manages safeguards, such as flaps and covers for example, via a safe guard-locking device for personnel protection applications up to PL d, Category 3 (EN ISO 13849-1). The 1950 N holding force FZH (F1max: 3900 N), with which the “small” safety locking device reliably safeguards even higher forces, ensures a high level of robustness.
The new PSENmlock mini can be attached simply and quickly using just two screws. It can be installed inside or outside the safeguard – to suit the application. The fact that it can be assembled quickly ultimately saves time during installation. The actuator also offers a high level of flexibility for installation, as it can be attached from the right, left and front. So even smaller swing gates and sliding gates can easily be safeguarded. As a result, there is much greater flexibility for designing machines.
Safe, energy-conscious and economical
The dual-channel operation of the solenoid and the bistable guard locking principle guarantee a high level of safety in the event of a power failure: that’s because the last state is maintained and the gate is closed. Users also benefit from reduced energy consumption, which helps to reduce costs. The OSSD outputs detect wiring errors and immediately switch the machine to a safe state in the event of a fault, thus guaranteeing safety.
The RFID safety switch with protection type IP 67 also offers a high degree of manipulation protection in accordance with EN ISO 14119: the coding is freely selectable – coded, fully coded or uniquely coded. An auxiliary release is integrated on two sides. What’s more, PSENmlock mini can also be connected in series up to PL d, Cat. 3, minimising wiring and simplifying commissioning. You save time and costs as a result. In combination with the control unit PITgatebox with integrated access permission system PITreader, the intelligent diagnostic system SDD (Safety Device Diagnostics) and the safe small controller PNOZmulti 2 from Pilz, the result is a complete, economical and reliable solution for safeguarding safety gates.