M12 Panel Mount Connectors

  Enquiry / contact me

With screw clamp contacts

Electronics & Electricity

M12 Panel Mount Connectors
M12 Panel Mount Connectors

In various applications mounting the connectors happens after the wiring. This means that the cable or the single wires already have been connected to the device and stick out of the front panel. The connector adapter is then either fixed to the housing with the aid of the hexnut or screwed directly into the M20 x 1,5 thread. Afterwards the single wires are clamped into the contacts of the connector and the insert is screwed to the adapter. The 4 and 5 pole connector head from Franz Binder can be positioned in 4 x 90° steps and fixed afterwards. In that way it is possible to pre-define the direction of the angled cable outlet. But even when different cables and wires are connected the screw clamp contacts allow easy mounting out in the field. Due to the maximum cross section of 1,5 mm² currents of up to 8 A can be transmitted with the 4 and 5 pole versions. With that these panel mount connectors can also be used for A-coded power versions.

Posted on May 4, 2012 - (485 views)
by
Franz Binder GmbH & Co. elektrische Bauelemente KG
Rötelstraße 27
74172 Neckarsulm - Germany
+49-7132-3250
+49-7132-325150
View full company profile
Location
More products from this supplier
Harsh Environment Connector
IP67 connectors
Angled M8 Connectors
Cable Connectors
NCCI
M8 connectors with 8 contacts
M12 overmoulded Profinet cable connectors
Connections using synergies
M16  cable connectors
M8 cable connectors of the 768 series
Related articles
Optimized Resistive Touch Solutions
RFID read/write Modules with IO-link
Schaffner Board of Directors Undergoes Changes
Mitsubishi Electric Unlocks Innovative Mobility Solutions
Speed Monitoring Safety Gear Unit
Tough Decisions: How to Choose the Right Power Supply
NAS HPEC System
Industrial Applications Processor
Next Generation Master Terminals
AEO 10.3x38: Automotive Fuse