The flat design of the new NET-BOX series of wall-mounted enclosures from OKW gives users plenty of scope for installing many different electronics assemblies, smaller displays and large-volume connectors. Wall mounting is effected on the right and left, and in between there is a large-volume surface for interfaces. When the wiring for the electronics has been completed, the connectors are covered with a trim - all this without any visible screw connections.The enclosure with its curved appearance consists of 3 individual components: a bottom part in the colour lava as well as a top part and a trim, both in light grey (RAL 7035). Thanks to the V0 ASA+PC material used and the IP 65 protection class for the electronics compartment, the product can also be used for terminal units outdoors. The enclosures are availablein 3 different sizes - version 140 in 140 x 140 x 46.5 mm (L x W x H), 180 x 180 x 48.5 mm for the 180 version and the NET-BOX 220 in 220 x 220 x 50.5 mm.