Many different types of optical imaging and sensing systems are today used to observe and measure the Earth and the universe at large. Drawing upon approaching 30 years expertise in designing radiation resistant optics for satellites and spacecraft, Resolve Optics is today a leading supplier of optical components and systems for this harsh remote environment.

Click here for further information.

Microprecision Electronics SA now introduced its MP100/200 series microswitches with an optional integrated LED indicator light. 

These microswitches with integrated LED status indicator have been designed for use at 24V in industrial automation applications. They allow a simple, visual control of the switching function, which can be very cumbersome to perform, in particular when the switch is mounted far away from the connected controller. Also, a broken cable will be instantly recognisable. In addition, the LED facilitates the intuitive calibration...

Power Springs are formed by winding a strip of material on an arbor and into a case or retaining ring to create a compact power source. Power spring features
retractable, tensioning and loading function. When it comes position movement and high adjustment of machine and appliance, precise positioning performance and easily operating are required at first priority. 

In medical devices field, Ming Tai's power spring had been employed in Draw-wire Encoder for positioning of MRI and x-ray machines, which has gained great performance.

Draw-wire...

Elesa is pleased to announce its continually expanding range of high-quality machine components such as handwheels, handles, clamping knobs, position indicators, knobs, latches, hinges, castors and levelling feet, which will be showcased at Hannover Messe (Hall 16, Stand G10 and Hall 3, Stand L42).

Column level indicators HCK series have been designed and realized to read the liquid level of hydraulic systems that use liquids containing aggressive chemical agents, including glycol-based solutions. Watch the video! At the exhibition...

Flir System cooled midwave infrared (MWIR) cameras have long held a tactical advantage over uncooled longwave infrared (LWIR) cameras in many airborne and ground-based missions.

While cooled MWIR cameras are highly sensitive, they are also larger, heavier, require more power, and cost more than uncooled LWIR cameras. Recent advancements in High Operating Temperature (HOT) MWIR technology open up new possibilities. 

Micro-Epsilon's optoNCDT 1320/1420 laser sensors based on the triangulation measuring principle perform non-contact displacement, distance and position measurements. Due to their low weight combined with compact size, the optoNCDT 1320/1420 sensors can be easily integrated into restricted installation spaces and are ideally suitable for applications where high accelerations occur e.g. on the robot arm or in pick-and-place machines. The high-performance optical system projects the small light spot sharply onto the measurement object which...

IDS has integrated the high-resolution 12 MP IMX226 rolling shutter sensor into the uEye CP camera family, giving increased resolution, speed and sensitivity. The new models are available with GigE or USB3 interfaces and are available from May.

Thanks to the BSI ("back-side-illumination") technology of the SONY STARVIS series of sensors, the IMX226 is perfect for tasks that require optimal results even in low light conditions. It delivers extremely low-noise images and is therefore ideally suited for applications in areas such as microscopy, logistics and traffic monitoring.

With...

With the new MP600 mechanical sensor family, Microprecision Electronics presents a low voltage position switch with NC and NO contacts. The travel between the two contacts is factory set at a distance ranging from  0.3mm to 1.5mm.

This allows two position detection without hysteresis and with a repeatability of less than 5µm.  One single sensor can be used to control high and low limits of a process, or home position and overrun position of a linear movement. 

Other Key Features are:

Temperature Range -40°C...

Ming Tai Industrial Co., one of leading manufacturers of steel strip springs, develops wide variety of high precision constant force springs for carbon brushes application. It ensures the carbon brush works consistently by dependably exerting constant pressure to increase brush life and to reduce electrical wear. Carbon brushes can also be used for earth return current units to divert static and induced electric currents in a motor shaft away from the bearings, and to protect them from pitting and damage.

Constant force spring keeps carbon brush to rub against...

The BradyPrinter i3300 Industrial Label Printer is a completely hassle free, easy to use PC-based printer. It can print a full range of safety and facility labels and signs as well as die cut labels for wire identification, product identification and laboratory identification. 

Print a huge range of labels & signs: highly versatile with over 50+ label materials compatible for wire & cable, product, laboratory, safety and facility identification.  Designed to last: prints on reliable, industrial grade labels...