All the Colours of the Digital Transformation at HANNOVER MESSE and CeMAT

  Enquiry / contact me

Interview with Marc Siemering, Senior Vice President - Industry, Energy & Logistics, Deutsche Messe AG about the parallel events from April 23 to 27

Automation, Industry 4.0

Interview with Marc Siemering, Senior Vice President - Industry, Energy & Logistics
Interview with Marc Siemering, Senior Vice President - Industry, Energy & Logistics
All the Colours of the Digital Transformation at HANNOVER MESSE and CeMAT
All the Colours of the Digital Transformation at HANNOVER MESSE and CeMAT
All the Colours of the Digital Transformation at HANNOVER MESSE and CeMAT
All the Colours of the Digital Transformation at HANNOVER MESSE and CeMAT

IEN Europe: In 2018 there will be a change in the leading trade fair themes. For the first time, IAMD (Integrated Automation, Motion & Drives) will be launched, a combination of the trade fair themes Industrial Automation and MDA (Motion, Drive & Automation). What was the trigger for that change?
Siemering: Industrie 4.0 erases borders between industries and shortens innovation cycles. Not only industrial companies have to react to these changes. HANNOVER MESSE also has to adapt to the new reality. Companies from the power transmission and fluid technology sectors have traditionally exhibited biennially at the show, but market demands have changed. In the digital age, companies bring products to market faster than ever and therefore want to display their innovations more often. An annual presentation at HANNOVER MESSE is the solution for these companies. Therefore, we combined Industrial Automation and Motion, Drive & Automation (MDA) to form IAMD–Integrated Automation, Motion & Drives. Of course, we still offer a home to the companies that want to exhibit every two years.

IEN Europe: Under the IAMD brand, the topic of digitization/industry 4.0 is to be communicated worldwide and made tangible. What has been the response so far?
Siemering: The market has responded positively. From a technological standpoint, Industrial Automation and MDA were already growing together during the past few years. The fusion follows the logic of a global market that both offers and demands more and more crossindustry and cross-system solutions and networked products. The new IAMD strengthens HANNOVER MESSE’s position as the world’s leading tradeshow for Industry 4.0. From components to data management in the Cloud, HANNOVER MESSE provides an overview of the complete solution and not just the separate parts. This strong brand and the key players behind it also give us more influence in the international exhibition market.

IEN Europe: On the website of the Hannover Fair you can find the announcement of more than 500 events in the IAMD environment. What spectrum of events can trade visitors expect?
Siemering: Every year we stage more than 80 conferences with more than 1,700 talks and panels about a broad range of topics. Some examples related to IAMD are the Motion & Drives Forum in Hall 23, the special area Smart Power Transmission and Fluid Power Solutions, and the Industry 4.0 Forum. Participants in these events will learn about the next steps on the way to a smart factory.

IEN Europe: The topic Industry 4.0 has already reached a degree of maturity at the last Hanover Fair that a large number of marketable products have been exhibited. What figures and developments are you expecting this year?
Siemering: In 2018, for the first time we are staging HANNOVER MESSE together with CeMAT, the world’s leading tradeshow for intralogistics and supply chain management. This brings a new dynamic to the show, further driving the digital transformation of industry through the interplay of automation and energy technology, intralogistics, IT platforms and artificial intelligence. Our lead theme “Integrated Industry – Connect & Collaborate” shows the potential of this development. HANNOVER MESSE is the pacesetter for Industry 4.0. Only in Hannover will you experience the rapid development of Industry 4.0 and its consequences. And only in Hannover can you see the digital transformation of industry presented as a complete system.

IEN Europe: Already during the last editions of the Hannover Messe, the topic of robotics, especially with regard to the aspect of human robot collaboration, aroused great interest among the visitors. These topics will of course also be in the spotlight at CeMAT, which will take place parallel to Hannover Fair for the first time in 2018. In your opinion, which visitors can benefit from this constellation?
Siemering: Robotics will play a big role in 2018, too. ABB, Epson, Kawasaki, Kuka, Mitsubishi, Schunk, Stäubli, Universal Robots, Franka Emika and Yaskawa - the list of companies signed up for HANNOVER MESSE 2018 reads like a “Who is Who” of the industry. Robotics companies, system integrators and providers of gripping technology demonstrate their solutions for smart factories and intelligent warehouses. It is no secret that robots and driverless transport systems have become indispensable in modern production facilities and automated warehouses. Robotics firms continue to set new standards for man-machine collaboration. Moreover, the trend that more and more small and medium-sized companies are discovering reasonably priced, flexible robotics solutions remains unbroken. At CeMAT, the startup Magazino from Munich will show its robotics competence with two robots: TORU picks cuboid objects in e-commerce shipping warehouses and is already in commercial use. SOTO works similar to TORU, but can handle much larger and heavier objects such as small load carriers or boxes up to 15 kilograms. SOTO is currently in the prototype phase and will go into operation later in 2018.

IEN Europe: At the leading trade fair Digital Factory, the focus is on industrial software along the entire process chain in production. Is this a “little sister of CeBIT”? Where do you see similarities and differences?
Siemering: Digital Factory and CEBIT are two completely different events. As part of HANNOVER MESSE, Digital Factory serves the manufacturing industry. The exhibitors show IT and software solutions for virtual product development, production planning, process control, and predictive analyses as well as concepts that enable the secure distribution of data in the digital factory. CEBIT has a completely different, much broader scope: It provides a 360-degree view of digitalization in companies, government and society. 

IEN Europe: The fair’s partner country will be Mexico. The country’s economic relations are strongly oriented towards its northern neighbour USA. Where do you see the greatest opportunities and points of contact for Europe and Germany?
Siemering: Mexico’s relationship with the USA, until now its biggest trading partner, stands at a transition point. Right now Mexico is very interested in growing trade with other countries as well as promoting structural change with the necessary infrastructure domestically. Mexico will use HANNOVER MESSE to present a range of innovative products, systems and industrial sectors as well as to expand its trade and economic relations with Germany. Germany is already Mexico’s most important trading partner in Europe and fifth most important worldwide. Furthermore, Germany is the fourth biggest European investor in Mexico and sixth biggest worldwide.

IEN Europe: Thank you for this interview Mr. Siemering!

Posted on February 11, 2018 - (220401 views)
Deutsche Messe AG
30521 Hannover - Germany
View full company profile
More products from this supplier
''This is the First Time in Our History that we Have to Postpone Hannover Messe''
''Exhibitors Must Adopt New Technologies and Processes to Overcome Today's Challenges''
“At Hannover Messe, Exhibitors Demonstrate 500 Functional Examples of Industrie 4.0’’
Hannover Messe Lays the Foundations for the Digital Transformation
EMO Hannover - The World of Metalworking
Looking Forward to.... 2017 HANNOVER MESSE
Hannover Messe: the complete picture of global industry
Opportunities in Digitalization!
Thinking 4.0: Hannover Messe 2016
Hannover Messe: Home of Industrial Pioneers
Hannover Messe - Home of Industrial Pioneers
Hannover Messe 2018
CeBIT 2015
CeBIT 2015
Hannover Messe 2014
Hannover Messe
Hannover Messe 2012: New technologies, new solutions, new networks
Hannover Messe, 23 - 27 april
“At Hannover Messe, Exhibitors Demonstrate 500 Functional Examples of Industrie 4.0’’
Hannover Messe Lays the Foundations for the Digital Transformation
Looking Forward to.... 2017 HANNOVER MESSE
Getting Ready for Industrie 4.0
“The Internet of Things Will Play an Important Role“
“Growing Trend Towards Integration In and Between All Areas of Industry“
Matchmaking Service Helps Trade Professionals to Attain Their Goals
Hannover Messe  23 - 27 April 2012
Related articles
Fastener Fair France
Robot Tools RFID Identifications
Drives & Controls 2020: The Home of Automation
Co-creating the Future of the IoT World
Procentec Diagnostic Tools
Embedded Solutions for IoT Applications
Advantech Co-creates the Future
PIAB Offers Automation Solutions
Guided Operator Solutions
Advantech Co-creates the Future
3D Printer and Method Materials
PROFINET Diagnostics Without Hardware
Software for Product Data Management
Unitronics' AC Servo Drives & Motors
Procentec Provides Critical Companies with Free Diagnostic Software for Industrial Networks
Data Extraction with AI-powered Anomaly Detection
MP600 Limit Sensors - Detect 2 Positions within Microns
Safety Laser Scanners To Banish Space Problems in Mobile Applications
Leading Industrial Projects through the Graphene Flagship Initiative
How to Tie Metrology to Robotics for Quality Control?