Energy Efficiency

Computer-on-Modules
Precision Resistor
Unlocking Energy Efficiency
SiC Diodes
Reliable Inspection of Wind Turbines
Hydraulic Systems
Robotics and Automation Systems
X-in-Board Technology
Maximizing Corrosion Protection Efficiency
Electricity as a Chemical Resource

Product in spotlight

Sponsored content
ClipX - The Precise and Easy-to-Integrate Industrial Signal Conditioner

ClipX - The Precise and Easy-to-Integrate Industrial Signal Conditioner

With an accuracy class of 0.01 and an integrated calibration certificate, the interference-proof signal conditioner ClipX is setting new standards in industrial process control. ClipX adapts to your measurement task, regardless of whether it is used with single- or multiple-channel applications, in manufacturing machines, in test benches or for production monitoring. Owing to the Plug and Play principle, up to six devices can be plugged simultaneously in a modular setup and the measured data can be pre-calculated. Unlike conventional measuring signal conditioners, ClipX does not require a separate...

Read more
GO. A breath of fresh air in power electronics

GO. A breath of fresh air in power electronics

A fast measurement speed, achieved within tight cost and size constraints while integrating the primary conductor in SO packages without compromising the necessary insulation, is often as critical as the other high performances for current measurement in motor-drive applications.

A unique sensor with an integrated primary conductor achieves optimum temperature accuracy, measuring from -40 to +125 °C in a surface mounted SO8 or SO16 package. 
  
• 10-30 A nominal current
• Better than 1.3 % accuracy @ +25°C 
• Differential Hall...

Read more
New draw-wire sensor

New draw-wire sensor

Compared to draw-wire sensors based on a conventional potentiometer, the new wireSENSOR WPS-MK88 U45R with a non-contact potentiometer achieves 8 times more working cycles, which extends the sensor’s service life to its maximum. This new technology combined with a robust plastic housing and a favorable price/performance ratio, sets new standards in terms of economic efficiency.

Due to innovative technology, the new, miniature wireSENSOR WPS-MK88 U45R offers maximum service life with approx. 2 million cycles. The sensor...

Read more
High Sensitivity Remote Leak Detection

High Sensitivity Remote Leak Detection

FLIR Systems High Sensitivity Mode (HSM) is a technological innovation to enhance the leak detection performance of their GF-Series optical gas imaging cameras. FLIR GF Series OGI camera's offer quick, non-contact remote measurement of gas leaks in real time.
Using the high sensitivity mode even the smallest of gas leaks can be spotted.

Further Information / Download

Read more
High Temperature Endoscope

High Temperature Endoscope

Resolve Optics has supplied several high temperature Short Wavelength Infrared (SWIR) endoscopic viewing systems to enable inspection of the blades in a gas turbine while in operation. To enable inspection during gas turbine operation required that the SWIR endoscope had to operate up to 950° C at the tip with 150PSI pressure and be able to withstand severe vibration. To overcome the negative effects of high temperature and pressure – Resolve Optics created a novel design which allowed introduction of cool air at high pressure at the mid-section of the endoscope....

Read more
Just Two Clicks to Get Your Measurement Result

Just Two Clicks to Get Your Measurement Result

EVIDAS software for physical data acquisition and analysis in the laboratory or test bench comes with a Cloud connection It enables you to save time, owing to its simple and clear workflows The Essential edition will be available from April 2018

EVIDAS is HBM’s new data acquisition and analysis software based on cutting-edge technology and open software interfaces. EVIDAS significantly accelerates and facili-tates data acquisition and comes with the HBM Cloud. 

Just two clicks to get your measurement result

Due to the intuitive user...

Read more
High Volume Machines for Hose Assemblies

High Volume Machines for Hose Assemblies

With more than thirty years of experience within the hose and tube processing equipment industry, OP is pleased to offer to their customers a complete range of products particularly suitable for the high volume production of hose assemblies: the crimping machine V160ES, the cutting machine TF6, the skiving machine SPF6 and the preassembling machine Insert 03P.

The model V160ES is a high volume crimping machine, ideal for crimping hoses up to 3” six spirals and industrial hoses up to 6” . The crimping force is of 345 TON, the max. crimping diameter is of 160...

Read more
IDS NXT: Extended product range and updated firmware

IDS NXT: Extended product range and updated firmware

IDS adds a new model to its family of vision app-based industrial cameras. IDS NXT vegas with 1.3 MP CMOS colour sensor, liquid lens with autofocus, ToF sensor for distance measurement and integrated lighting will be available from the end of April. Plus: updates for firmware and cockpit.

What makes IDS NXT so special?

1. The freely programmable platform is not restricted to specific tasks. Users can change and set up their preferred vision tasks in a very short time. This eliminates the need to switch devices.

2. The image processing engine of devices like...

Read more
Precision displacement, distance and position measurement under pressure

Precision displacement, distance and position measurement under pressure

The eddyNCDT 3005 from Micro-Epsilon is a new, powerful eddy current measurement system for fast, high precision displacement measurements. Due to its pressure-resistant, thermally stable and compact design, the eddyNCDT 3005 is ideal for machine integration.

Non-contact eddy current sensors from Micro-Epsilon are designed for extremely high precision measurement of displacement, distance, position, oscillation and vibration, etc. to micrometer accuracies. Pressure, dirt, oil or high temperatures have almost no influence on measurement precision. This eddy current measurement system...

Read more
More Power in the Hand

More Power in the Hand

The new 2668 … CR DC motor from FAULHABER offers considerably more power than comparable drives, and is the most powerful copper-graphite commutated DC-micromotor in its size class on the market. Thanks to a bigger NdFeB magnet and a high copper content in the winding, it supplies a rated torque of 70 mNm. As a result, it weighs just 189 g with a diameter of 26 mm. Furthermore, it reaches full power extremely quickly with its high pulse torque. The 2668 … CR is thus especially well suited for professional high-performance tools such as pruning shears...

Read more