Energy Efficiency

Yokogawa Delivers Control System For Europe’s First Hybrid-Flywheel Energy Storage Plant
Barriers to Energy Efficiency: Common Sense Needs Common Aspiration
Levante Capital Selects Orc to Support Growth in Energy Markets
Next Generation Solar Collectors Conquers China
Upgrade Of The World's Oldest Energy Recovery Plant in Bjølvefossen, Norway
Brush DC Motors With Energy Efficient Coreless Design
Energy Monitoring Hot Swap Controller
Cutting Fluid Maximizes Efficiency and Reduces Workplace Pollution
Energy Efficient Twisted Pair Transceivers
Climeon Ocean Next Generation of Heat Power

Product in spotlight

Sponsored content
The new and inexpensive 2.5 A appliance inlet of the type 2570 in various versions

The new and inexpensive 2.5 A appliance inlet of the type 2570 in various versions

The appliance inlet series of the type 2570 by SCHURTER provides various mounting variants and terminal options. Because of its cost-effective design and the wide range of approval certificates for Europe, America and Asia, the C8 inlet is best suited for both industrial and consumer applications.

The appliance connector for snap-in mounting is available with solder-, quick connect- or PCB-terminals. The PCB-terminals in combination with the sandwich mount are specially for the application on printed circuit boards. This way the board can be fully equipped and...

Read more
High-Speed High Sensitivity Thermal Camera

High-Speed High Sensitivity Thermal Camera

Precise camera synchronization and triggering make FLIR Systems A6700sc series thermal camera ideal for high-speed, high sensitivity applications. Working in snapshot mode the FLIR A6700sc is able to register all pixels from a thermal event simultaneously.

This is particularly important when monitoring fast moving objects where a standard thermal imaging camera would suffer from image blur. Routinely achieving a high thermal sensitivity of <20 mK, the FLIR A6700sc is able to capture the finest image details and temperature difference information.  

For...

Read more
Patented retention system for pressure hoses

Patented retention system for pressure hoses

The energy contained within a pressure hose, in case of disconnection from the fitting, can be very dangerous to anyone or anything in its vicinity.

The patented system STOPFLEX of OP srl, has been designed to arrest the trajectory of the flexible hose, thus avoiding that the energy contained inside may trigger a frightening "whip effect".

The cable secures the hose to the plant protecting both the operators and components.

The bend, equipped with a rubber gasket, remains perfectly secured, simultaneously allowing the hose to swell according...

Read more
Discover More About Bonfiglioli's New Frequency Inverter with Higher Protection Rating and Performance

Discover More About Bonfiglioli's New Frequency Inverter with Higher Protection Rating and Performance

Bonfiglioli's well-proven S2U inverters are now also available at higher power and with an IP66 protection rating. The compact S2U IP66 Plug & Play inverter for single-phased 230-volt networks and three-phased 400-volt networks comes in three sizes with engine power ranging from 0.4 kW to 18.5 kW. The new S2U IP66 inverter series is particularly suited to applications that require high resistance to environmental impacts, as well as those that require high braking power without braking resistor, and a high torque at low speed such as packaging machines, textile machines, material handling,...

Read more
Finding Hot Spots and Speeding Up PCB Repairs

Finding Hot Spots and Speeding Up PCB Repairs

Take the guesswork out of thermal testing of your electronic products with fast discovery of hot spots and potential points of failure. "The FLIR ETS320 has helped us to clearly visualizes hot spots on our assembled printed circuit boards. At ISOMEDIA, we value our time, so if we have something like the ETS320, it speeds up the repair work tremendously. It's also easier to use for this type of work". Watch this video to find out how the FLIR ETS320 reduced test times and sped up repairs for an electronics company. Hands-free troubleshooting!

 

Read more
Confocal Midrange Controller with one and two Channels

Confocal Midrange Controller with one and two Channels

The confocalDT 2421 and 2422 controllers open up new possibilities in precision distance and thickness measurement on different surfaces. The two-channel variant is an innovation whereby two confocal sensors are connected to a controller.

Particularly for diverse measurement tasks in the glass industry where typically high throughput rates occur, the new confocalDT 2421 and 2422 confocal controllers are ideal. Therefore, it is possible to perform multi-track measurements on flat glass, two-sided thickness measurements and multipoint...

Read more
CDS1 - Configurable Display Switch

CDS1 - Configurable Display Switch

SCHURTER is launching a new generation of intelligent input systems with capacitive touch technology. The intuitive operation with the touch of a finger stroke, wipe or rotation on the touchscreen conveniently resembles that of a smartphone. It delightfully responds to the visual taste and selection wishes of the customer.

Fully configurable

The user decides what is displayed. Then, with a wipe of the bright round OLED display, the selection can be activated. Tap the home LED to return to the home screen. Hard image change,...

Read more
SMD Solid-state Fuse for the Most Demanding Applications

SMD Solid-state Fuse for the Most Demanding Applications

SCHURTER's new High Current Fuse, HCF, is an extremely robust SMD fuse, designed using solid-state / thin-film technology. The HCF is especially suited for use in particularly harsh applications, where the reliable interrupt of high currents is critical.

SCHURTER's experience, acquired from the development of solid-state fuses for the space industry, and the cooperation with ESA, have led to the development of the HCF. The new HCF has a similar structure as the two ESA-certified types SCHURTER MGA-S and HCSF. Fuses used in Space applications meet the...

Read more
CDS1 - Configurable Display Switch

CDS1 - Configurable Display Switch

SCHURTER presents an intelligent input system with capacitive touch technology. The intuitive operation with a finger stroke, wipe or rotation on the touchscreen corresponds to that of a smartphone. The user can decide what is displayed or activated in the case of wiping on the bright, round OLED display and the home LED.

• freely configurable input and display function
• state-of-the-art technology
• full faced touch screen
• round OLED display
• Plug-and-Play

Visit us at SPS, hall 8 booth 8-404

Read more
Save 10 Seconds per Identified Cable

Save 10 Seconds per Identified Cable

The new Wraptor A6500 Wire Identification Printer Applicator can significantly increase production output by identifying cables with wrap-around labels in 5 seconds. The Wraptor automatically prints and applies the label on a wide range of insertable cables, saving up to 10 seconds per identified cable.

Increased efficiency

The Wraptor A6500 is a great tool to control manufacturing cost and enhance identification quality by automatically printing and applying labels. It identifies cables in 5 seconds, eliminates the need to print labels in advance and the time needed...

Read more