Camozzi provides the series DRCS, which refers to compact and optimized one-size drives that have been specially configured for small and medium-sized Camozzi stepper motors. They can control stepper motors with two-phase and micro-stepping feed. Moreover, they are able to calculate the normal resonance frequency of the motors and optimize their driving. Through the use of micro-stepping control (up to 1/128 steps), the drive is enabled to almost replicate a sinusoidal current while significantly reducing the natural resonance of the motor itself.
Possibility to extract production and statistical date on the use of the drive for Industry 4.0
The setup of a table of 256 commands is made possible thanks to the availability of eight inputs. In each command (can be absolute or relative) it is possible to set position, speed, acceleration and deceleration. The step and direction commands allow to control the drive in frequency mode. The frequency defines the speed, while the number of steps define the position. The drives operate with an innovative system that takes advantage of near field communication (NFC) technology for Industry 4.0 purposes.
Visit Camozzi at SPS Smart Production Solutions Hall 4, Booth 360
