Product in spotlight

Sponsored content
Ultra-Fast High Resolution Thermal Imaging

Ultra-Fast High Resolution Thermal Imaging

The FLIR X6900sc is an extraordinarily fast, highly sensitive MWIR camera designed for scientists, researchers, and engineers. Capturing 640 x 512 images at 1000 frames per second, makes the FLIR X6900sc the world’s fastest full-resolution, commercially-available thermal camera. On-camera streaming and digital recording enables saving up to 26,000 frames of full resolution data to on-camera RAM with a guarantee of zero dropped frames.

Whether measuring temperatures on fast moving objects or characterizing the thermal transient of objects as they heat up, the...

Read more
GO. A breath of fresh air in power electronics

GO. A breath of fresh air in power electronics

A fast measurement speed, achieved within tight cost and size constraints while integrating the primary conductor in SO packages without compromising the necessary insulation, is often as critical as the other high performances for current measurement in motor-drive applications.

A unique sensor with an integrated primary conductor achieves optimum temperature accuracy, measuring from -40 to +125 °C in a surface mounted SO8 or SO16 package. 
  
• 10-30 A nominal current
• Better than 1.3 % accuracy @ +25°C 
• Differential Hall...

Read more
New Measuring Module GEN2tb Enables Convenient and Flexible Entry into Data Acquisition with Ultra-High Sampling Rates

New Measuring Module GEN2tb Enables Convenient and Flexible Entry into Data Acquisition with Ultra-High Sampling Rates

New GEN2tB portable data recorder from the HBM Genesis HighSpeed series; An ideal entry-level product that can be used flexibly for various applications such as eGrid; and e-drive testing, high-speed mechanical testing, and electrical transient recording; Usable as a PC front-end or stand-alone device with the integrated hard disk; and Includes high-speed data acquisition software—Perception.

With the portable data acquisition system GEN2tB, HBM Test and Measurement (HBM) introduces a high-performance starter device for high-speed measurement technology with sampling rates of up...

Read more
Preserve Your Process Integrity While Measuring Flow

Preserve Your Process Integrity While Measuring Flow

The new MetraFlow ultrasonic flowmeter from Titan Enterprises incorporates a chemically resistant Perfluoralkoxy Alkane (PFA) tube onto which are mounted high sensitivity ultrasonic sensors. There are no dead areas, changes in fluid direction or obstructions, just a tube. As a result - MetraFlow can make non-intrusive flow measurements preserving the cleanliness of your process.

Applications including drug production, electronic device creation, medical research and food manufacture, require that a flowmeter has no inclusions or dead areas as this can lead to contamination...

Read more
NEW! End-of-Arm Collaborative Robot Vacuum Tool

NEW! End-of-Arm Collaborative Robot Vacuum Tool

The NEW Collaborative Robot Vacuum Tool adds unparalleled flexibility when paired with your collaborative robot end effector. The CRVT is highly configurable and has the ability to pick up variety of work pieces without changing the tool.

With a quick, easy plug and play operation – simply supply compressed air and a signal to control the valve and your operation will be running in no time.

For further information please click here

Read more
Robust, Easy to Clean, and Compatible with the Z6 Market Standard

Robust, Easy to Clean, and Compatible with the Z6 Market Standard

HBM’s new Z6R bending beam load cell has been designed for maximum capacities ranging from 20 to 200 kg. It is outstanding for its extremely robust enclosure, dirt-repellent design, and compatibility with the Z6 load cell. Typical fields of application can be found in the packaging or food-processing industries.

The robust enclosure withstands mechanical stress and is not af-fected by dirt, humidity, and aggressive media. Owing to its innovative design, without any gaps or edges, the Z6R load cell is easy to clean. Scale manufacturers and system operators, thus,...

Read more
Thermal Imaging Handbook for R&D Professionals

Thermal Imaging Handbook for R&D Professionals

FLIR Systems ‘Ultimate Infrared Handbook for R&D Professionals’ was developed to enable users of thermal imaging cameras to develop a comprehensive understanding of infrared (IR) technology and use this resource as a guidebook for gaining optimal benefit from their camera. FLIR experts have contributed on major topics including - how IR works, IR detectors for thermographic imaging, getting the most from your IR camera, how filters extend IR camera usefulness and ultra high-speed thermography.

Further information

Read more
Brushless DC-Servomotors with Ø 16 mm

Brushless DC-Servomotors with Ø 16 mm

The new 1660 ... BHx series sets new standards: with respect to dimensions and weight, it delivers high speed and power values with low vibration and heat development, something inconceivable until recently. This drive series is thereby predestined for handpieces with high power requirements in applications with limited installation space.

The BHx series made by FAULHABER are new high power slotless brushless motors in 16 mm diameter based on a 2-pole technology. Through their robust, compact design and outstanding performance data, the motors of this new product family are particularly...

Read more
Constant Force Spring Increases Carbon Brush Life and More

Constant Force Spring Increases Carbon Brush Life and More

Ming Tai Industrial Co., a total solution of steel strip spring, has developed a wide range of Constant Force Springs, which can be widely used in rail vehicles and wind power turbine.
In rail vehicle, constant force springs designed for carbon brushes can be applied to alternators; auxiliary motor, blower motor, traction motor, slip ring and earth return current units. In wind power turbine, it can be applied to grounding system, motor commutator as well. 
Constant force springs ensure that the carbon brush works consistently by dependably exerting constant pressure to increase...

Read more
Quickly identify small volume products

Quickly identify small volume products

It can be quite time consuming to find a limited amount of industrial grade labels to identify small volumes of products or components. The BBP37 Multicolour & Cut Label Printer offers a solution by enabling you to design, print and cut small numbers of reliable product labels at your location in a wide variety of shapes, sizes and colours.

Custom product labels on demand

With a BBP37 Multicolour & Cut Label Printer on-site, you can easily print and cut small volumes of industrial grade identification labels when they are needed. The BBP37 offers multicolour thermal...

Read more
Basler AG Signed a Join Venture Agreement with Chinese Distributor Beijing Sanbao Xingye
Industrial Grade Edge Computing Device
Breakthrough Plug & Use Connectivity Technology
Monitoring receiver
USB 3.1 Gen 1 board level cameras with liquid lens control
CO2 and RH/T Sensor Module
Innovation Award for Methane Detecting Cameras
Differential Pressure Sensor EE600
Switching to Hydraulic Oil
Continental won Eight Prizes at the German Innovation Award
Which Lithium-Battery Fits in my Project?
Power Generation and Storage Come Together
First Edition for Fastener Fair in France
Photovoltaic Fuse Holder

Industry 4.0

View all

Events

View all
Sindex

Sindex

from August 28, 2018 to August 30, 2018
Sindex 2018 is an industrial Fair including automation, robotics and handling, fluid power, electronics, electrical...
Read more
FachPack

FachPack

from September 25, 2018 to September 27, 2018
FachPack is the European trade fair for packaging, processing and technology. With specific answers to the issues that will...
Read more
Future Resource

Future Resource

from September 12, 2018 to September 13, 2018
The Future Resource Expo is dedicated to helping businesses find more efficient, sustainable and cost-effective ways of managing...
Read more
Sensors & Instrumentation

Sensors & Instrumentation

from September 25, 2018 to September 26, 2018
Sensors & Instrumentation, the UK’s only dedicated exhibition for test, measurement and control, returns to Hall 1,...
Read more
WindEnergy

WindEnergy

from September 25, 2018 to September 28, 2018
The Global Wind Summit, to be held in Hamburg in 2018, reflects impressively the wind energy success story. Comprising (1)...
Read more