Automotive Industry to Invest More in Smart Factories

  Enquiry / contact me

A study from the Capgemini Research Institute highlights the fact that automotive industry is planning to make 44% of its factories smart in the next five years

Artificial Intelligence, Automation

Automotive Industry to Invest More in Smart Factories
Automotive Industry to Invest More in Smart Factories

In a new research report, the Capgemini Research Institute shed light on the acceleration of the investment for smart factories from the automotive industry. Among this study, the automotive industry is planning to make 44% of its factories smart in the next five years, but it will also have to invest in skills and systems to take full advantage. The automotive industry is motoring ahead of its peers in terms of smart factory adoption and is set to increase investment by over 60% in the next three years, resulting in productivity gains of more than $160bn. 

The “How automotive organizations can maximize the smart factory potential” report tracks deployment of smart factories by automotive Original Equipment Manufacturers (OEMs) and suppliers in 2019, compared to equivalent research from 2017/18. It found that both projected investment levels and productivity gains relating to smart factories are significant, but that only a minority of automotive firms are fully ready to take advantage through deployment at scale. Capgemini’s analysis ranks 72% of automotive firms as ‘novices’, compared to just 10% being ‘frontrunners’ who are ready to realize the full potential of smart factories at scale (18% of OEMs were frontrunners vs. 8% of suppliers). 


Automotive industry has exceeded previous expectations on smart factory development


In the last 18-24 months, 30% of factories in the industry have been made smart; ahead of the 24% that executives said they had planned in 2017/18. Capgemini also found that almost half (48%) of executives believe they are ‘making good or better than expected’ progress on their smart factory roadmap, compared to 38% who responded to this same question 18 months earlier. 

“There are three primary reasons why we took up the smart factory initiative,” says Dr. Seshu Bhagavatula, President, New Technologies and Business Initiatives at Ashok Leyland, one of the largest heavy vehicle manufacturers in India. “The first is to improve the productivity of our old factories through modernizing and digitizing their operations. The second is to deal with the quality issues that are difficult for human beings to detect. And the third is to incorporate made-to-order or mass-customization capabilities. All these formed part of a massive internal strategic program called Modular Business Program.”


Automotive is moving faster than other industries


In the next five years, the automotive industry has aggressive plans to convert further 44% of its factories into smart facilities, followed by 42% in discrete manufacturing, 41% in process industries, 40% in power, energy and utilities, and 37% in consumer products. This aggressive expansion is reflected in a 62% increase in the proportion of overall revenue the industry plans to invest in smart factories. Automotive companies will be investing into a combination of greenfield and brownfield facilities: 44% intend to take a hybrid approach, 31% to build brownfield factories (estimated to cost $4mn-$7.4mn per facility for a top-ten OEM), and 25% greenfield (at a cost of $1bn-$1.3bn per factory) – considerably more expensive, but easier to make efficient by design.


Investment in smart factories reflects a huge productivity opportunity


By 2023, the research estimates that smart factories could have delivered a productivity gain in the region of $135bn (average scenario) to $167bn (optimistic scenario): an annual improvement of 2.8%-4.4%, and an overall productivity gain of 15.1%-24.1% for the industry as a whole by 2023. The potential for these gains is already being demonstrated by companies such as Mercedes-Benz Cars, which has achieved a fourfold reduction in rejection rate on some key components through its use of advanced data analytics to create self-learning and self-optimizing production systems

“Automotive companies have progressed better on their smart factory initiatives in the last two years and clearly plan to increase the pace of adoption from here onwards. Today, auto OEMs and suppliers are committing significant investment, and by 2023, we can expect these investments to pay off with organizations realizing annual productivity gains of at least 2.8% to 4.4%,” said Markus Winkler, Global Head of the Automotive Sector at Capgemini. “However to get there, auto firms must address gaps in the talent pool, technology strategy and organizational commitment to deploy at scale, and realize the full benefits offered by smart factories. While smart factories are a critical part of the Intelligent Industry, OEMs and suppliers must also focus on smart operations including smart asset management, smart supply chain and service management to completely unlock the potential of the various technologies.” 


Gains are yet to be realized


While the industry has set stiff KPI targets for its smart factories, these are a long way from being fulfilled: of the 35% productivity improvement target, just 15% has been achieved so far, and there has been only an 11% improvement in Overall Equipment Effectiveness (OEE) and reduced stocks/WIP, compared to targets of 38% and 37% respectively. This demonstrates that many initiatives are yet to be scaled fully. 

For automotive organizations to deploy smart factories at scale, the new report recommends them to set and commit to a vision, work hard to integrate IT solutions, and strengthen IT-OT convergence. Furthermore, they would need to build a talent base for the future and nurture a culture of data-driven operations.

Posted on February 5, 2020 - (402 views)
Related articles
IoT RFP Ready Kit
Kontron at Embedded World 2020: IoT Solutions for Digitization
Robotics Solution Enables Flexible Production
How to Tie Metrology to Robotics for Quality Control?
''Manufacturing Companies Must Automate their Production to Stay Ahead of the Curve''
AI-based Predictive Maintenance can Significantly Increase Robot Availability
What’s in the Future of Robotics?
''We Can Train Machine Learning and Deep Learning Models up to 10 Times Faster''
Deep Learning Segmentation & Classification Libraries
Analytics Platform for Wireless Infrastructure Management
Hannover Messe: Home of Industrial Pioneers
PIAB Offers Automation Solutions
Guided Operator Solutions
Endress+Hauser, Expertise in Process Automation
Distrelec Webinar Series
Distrelec Webinar Series
Permanent monitoring solutions for downtime prevention
Find your answers to your needs on-site
Enhance your Productivity
Partner Program Helps Choose the Right Product
How to Tie Metrology to Robotics for Quality Control?
Deep Learning Segmentation & Classification Libraries
Analytics Platform for Wireless Infrastructure Management
AI Embedded Edge Computer
MP600 Sensors - Sensing 2 Positions within Microns
Software for Machine and Plant Documentation
Automated Removal with the Right Gripper Concept
Compact 3-Phase Mains Filter
Endress+Hauser To Showcase Self-Monitoring Measurement Technologies
Wireless RISC-based Panel PC
How to Tie Metrology to Robotics for Quality Control?
Analytics Platform for Wireless Infrastructure Management
Smarter Approach to Vehicle Part Traceability
Delta Electronics Press Conference: updates on the DIAStudio
MP600 Sensors - Sensing 2 Positions within Microns
Software for Machine and Plant Documentation
Automated Removal with the Right Gripper Concept
The CC-Link Partner Association Launches Video Series on Time-Sensitive Networking
Endress+Hauser To Showcase Self-Monitoring Measurement Technologies
"Everyone can become a process miner"