Adhesive
Adhesive

Aremco Bond 614 is an advanced, two-part, electrically and thermally conductive adhesive that is formulated using a low-cost nickel flake filler. This system exhibits a volume resistivity of less than 0.025 ohm-cm at room temperature, and a thermal conductivity of 0.5 W/m-oK. The continuous operating temperature range is 360 °F (182 °C) and intermittent use temperature is 400 °F (205 °C). The tensile shear strength is 2,500 psi and Shore D hardness is 78. Mixed viscosity range is 100,000 to 110,000 cP. Aremco-Bondtm 614 mixes easily in a 1-to-1 ratio by weight. It sets at room temperature in 24 hours or can be heat cured in 2 hours at 100 oF. It comes in pint, quart and gallon kits and can be specially packaged in divided bi-packs upon request. Typical applications include electrical connectors, LEDs and sensors as a replacement for solder.

Posted on September 3, 2012 - (349 views)
by
Aremco Products Inc
707-B Executive Boulevard
10989 Valley Cottage - USA
+1-845-2680039
+1-845-2680041
View full company profile
Location
Related articles
Hannay Reel Hose and Cable Reels
Digital multimeter, Carrying case and Weller Gas Soldering Iron
JDN Mini 24/07
System-based High Precision Linkages
Hannay Works Here
FANDIS' FF Series of Filter Fans
SAFETY? That's our top Priority
The Reel That Works as Hard as you
Constant Force Spring and Clip For Carbon Brush Holder Application
Maximum Efficiency Please.