2MHz Boost/SEPIC/Inverter

  Enquire / contact me

Features 2A, 100V Power Switch & 9µA IQ

Electronics & Electricity

2MHz Boost/SEPIC/Inverter
2MHz Boost/SEPIC/Inverter

Analog Devices announces the Power by Linear™ LT8361, a current mode, 2MHz multitopology DC/DC converter with an internal 2A, 100V switch. It operates from an input voltage range of 2.8V to 60V and is suitable for applications with input sources ranging from a single-cell Li-Ion battery to multicell battery stacks, automotive inputs, telecom power supplies and industrial power rails. 

Configurations

The LT8361 can be configured as either a boost, SEPIC or an inverting converter. Its switching frequency can be programmed between 300kHz and 2MHz, enabling designers to minimize external component sizes and avoid critical frequency bands, such as AM radio. Furthermore, it offers over 90% efficiency while switching at 2MHz. Burst Mode® operation reduces quiescent current to only 9μA while keeping output ripple below 15mVp-p. The combination of a small MSOP-16E package and tiny external components due to the high switching frequency ensures a highly compact footprint while minimizing solution cost.

Efficiencies

The LT8361’s 375mΩ power switch delivers efficiencies up to 95%. The LT8361 offers spread spectrum frequency modulation to minimize EMI concerns. A single feedback pin sets the output voltage whether the output is positive or negative, minimizing pin count. Other features include external synchronization, programmable UVLO, frequency foldback and programmable soft-start.

Availability

The LT8361EMSE is available in an MSOP-16E package (4 pins removed for high voltage spacing). An industrial temperature (–40°C to 125°C) version (the LT8361IMSE) and a high temperature (–40°C to 150°C) version (the LT8361HMSE) are also available.

Posted on June 7, 2018 - (259 views)
Analog Devices GmbH
Otl-Aicher-Str. 60-64
80807 München - Germany
+49 89 76903 0
View full company profile
Location
More products from this supplier
Related articles
Electronic Thermostat
PCB type AC-DC Switching Power Supplies
Electric charge reduction of compressor air
Single Phase Filter
Heaters of H series
NS Series Safety Switches
EMC Filter FN 3287 and FN 3288
Innovative Systems Solutions
Reflowable Thermal Switch
Innovative Systems Solutions Made by LAPP
A Fanless PSU Supporting the Peak Power of 1200W
AC/DC Switching Power Supplies
Print a wide range of labels and signs
Industrial Ethernet Solutions
FPC/FFC Connectors
AC-DC Power Supplies
Emergency Stop Buttons
Ceramic Fuse for Single-Phase Applications
EMC/RFI Filters for Inverter and Power Drive Systems
Industrial Wireless LAN Access Points
Print a wide range of labels and signs
Ergonomic Safety Handles
Reflowable Thermal Switch
Alkaline Batteries
Safety Switches with RFID Technology
Metal Line Switches from SCHURTER
Light Pipe for Status Display
Multi-functional Safety Relay Module PROTECT SRB-E
SnapLock D-SUB hood
Digital Lock-in Amplifier MFLI